bought another 3/4 ton need help an advice on parts

[jamiebarnesjr3]

hey everyone i just picked this truck up its a 85  k20 4x4 longbed 350 with a 4 speed. i paid 500.00 for it its not bad but i need parts to make her what she should be. thing is i bought my 84 already done so im lost here. its very solid but needs a few things and a paint job. heres what i need
1- driverside inner wheel box
2- dash or dash cap
3- fender emblems
4-door panels
5- chrome strips down the sides
just lookingh for places to order this stuff thats the cheapest of the cheap.

also i would like some info on it its a 350 whats the horsepower,it has 14 bolt rears what rear gears should be in there from the factory, and its not a canadian truck. i dont wanna deal with running rpo an vin tag things just wondering what they came with

also wats everyones opinion on color schemes just curious


thanx all

[Blazin]

Most all those parts I am pretty sure Chris can get.
As far as rears, and gears: Should be a 10 bolt front end. Most common gears I have run across in that vintage was 3:42s, and second common was 4:10s.

[Captkaos]

This site sells most of those parts.  look at the image at the top and click it.
1) http://store.73-87chevytrucks.com/merchant2/merchant.mvc?Screen=PROD&Store_Code=7&Product_Code=0850-325&Category_Code=7387Beds

2)http://store.73-87chevytrucks.com/merchant2/merchant.mvc?Screen=CTGY&Store_Code=7&Category_Code=DC

3) check Cheyenne Pickup

4) http://store.73-87chevytrucks.com/merchant2/merchant.mvc?Screen=CTGY&Store_Code=7&Category_Code=DP

5) check with a paint shop.  This is a common piece.

the 350 had 185hp.  Gears depend on options but as Blazin most were 3.42 or 4.10