« previous next »
Pages: 1 [2]   Go Down

Author Topic: 355 problem  (Read 10792 times)

Offline RedEightySix

  • Newbie
  • Posts: 27
Re: 355 problem
« Reply #15 on: July 01, 2010, 05:25:22 pm »
I would highly advise against 2.73 gears if you're driving around town. 3.73 is what I have in my truck and I love them, that is with a 700R4, 2400 stall and an eaton locker in the rear. 2.73's were WAYY to sluggish for me, couldn't even power brake it.
Logged

Offline greatdane

  • Registered Users
  • *
  • Posts: 223
Re: 355 problem
« Reply #16 on: July 02, 2010, 07:56:26 pm »
The plan is for 3.73s but I am cashed out for now! I will get different gears soon after I get it running. I am not sure if they are 2.73 or not can you tell by the vin#?
« Last Edit: July 02, 2010, 07:58:42 pm by greatdane »
Logged
'84 GMC Sierra Classic SWB 2WD
'08 Chevy Silverado Ext Cab 2WD
'74 AMC Matador 2dr Coupe

Offline Lt.Del

  • Andy aka:SgtDel
  • Senior Member
  • ****
  • Posts: 3864
  • DelbridgePhotography.com
    • www.delbridge.net
Re: 355 problem
« Reply #17 on: July 02, 2010, 08:20:56 pm »
with 2.73 and an OD trans, you could break 200mph top end, but, it would take 3 days to get there.
Logged

Offline greatdane

  • Registered Users
  • *
  • Posts: 223
Re: 355 problem
« Reply #18 on: July 02, 2010, 09:52:00 pm »
Here it is better late than never!!!! Shipped today! I should get it tue or wed.....
Logged
'84 GMC Sierra Classic SWB 2WD
'08 Chevy Silverado Ext Cab 2WD
'74 AMC Matador 2dr Coupe

Offline 74k20

  • Registered Users
  • *
  • Posts: 145
Re: 355 problem
« Reply #19 on: July 02, 2010, 10:50:39 pm »
Very nice looking motor.  Congrats on getting this resolved. 

Question, is the paint inside the head exhaust ports along with the water pump and fuel pump?  Are all the exposed threads also painted? 

Don't really matter, maybe I waist way too much time masking stuff off.  Looking at the pictures makes me drool. and want to do another detail on mine.

Again, looks nice. ;D

MJ
Logged

Offline beastie_3

  • Senior Member
  • ****
  • Posts: 3170
  • Josh
    • My truck pics
Re: 355 problem
« Reply #20 on: July 03, 2010, 02:10:20 am »
Im glad Uncle Rico put the fear into the engine builder!
Logged

Offline Irish_Alley

  • Tim
  • Senior Member
  • ****
  • Posts: 13333
  • Family is not an important thing. It's everything.
Re: 355 problem
« Reply #21 on: July 03, 2010, 03:45:27 am »
godddd are you going to finish those tots ???
Logged
If you can’t tell yourself the truth, who can you tell it to?~Irish_Alley

When you have eliminated the impossible, whatever remains, however improbable, must be the truth ~Sherlock Holmes

Offline RedEightySix

  • Newbie
  • Posts: 27
Re: 355 problem
« Reply #22 on: July 05, 2010, 10:18:24 pm »
Quote from: SgtDel on July 02, 2010, 08:20:56 pm
with 2.73 and an OD trans, you could break 200mph top end, but, it would take 3 days to get there.

I guess that would explain why my 700R4 would never go into over drive when i had my 2.73's.
Logged

Offline greatdane

  • Registered Users
  • *
  • Posts: 223
Re: 355 problem
« Reply #23 on: July 06, 2010, 04:29:42 pm »
I got the engine today it looks as good as the pictures! I will be putting it in the truck Saturday!!!
Logged
'84 GMC Sierra Classic SWB 2WD
'08 Chevy Silverado Ext Cab 2WD
'74 AMC Matador 2dr Coupe
Pages: 1 [2]   Go Up
« previous next »