« previous next »
Pages: [1]   Go Down

Author Topic: tire question  (Read 2845 times)

Offline Phil.

  • Newbie
  • Posts: 25
tire question
« on: April 29, 2011, 01:16:10 pm »
Will a 35 12.5 fit on a narrower rim? Not sure what mine are, but I know
There not a true 12.5 rim
 
Logged

Offline Grim 82

  • Senior Member
  • ****
  • Posts: 1651
Re: tire question
« Reply #1 on: April 29, 2011, 01:19:08 pm »
You can put them on 8" wides, but 10" wides look better.
Logged
Give a man a gun, and he might rob a bank. Give a man a bank, and he might rob the world.

Offline bake74

  • Senior Member
  • ****
  • Posts: 5871
    • Build Thread
Re: tire question
« Reply #2 on: April 29, 2011, 01:20:21 pm »
      12.5 on the tire does not mean they need a 12.5" rim.  That number means the tread width is 12.5".  The rim itself is smaller, I have heard of people mounting that tire on 9" rims, though I would be safe and use at least a 10" rim.
Logged
#1: The easiest and most obvious solution to any problem is 99% of the time correct.
#2: There is no such thing as impossible, it just takes longer.
  74 k10, 77k10    Tom

Offline Da67goatman

  • Site Supporters
  • Junior Member
  • ******
  • Posts: 758
  • Burban
Re: tire question
« Reply #3 on: April 29, 2011, 10:31:30 pm »
I mounted 33 12.50 on 6.75" wide rims, you have a huge range of acceptable rims widths.  Use the rim width to to help fit the tire without rubbing.  Every .5" change in rim width, the section width will change .25" roughly.  Just don't get rims that are too much wider than your tire or you'll have bead seating problems.
Logged
<Pitcrew>
1989 R2500 Suburban mild 350 TBI 700r4 10.5" 14bolt 4.10 w/ 33s
1992 fullsize Blazer 4x4  35s no lift, 4.10s, Hella driving lights, TJ Flares, Huge bumpers, Snorkel, custom interior
Pages: [1]   Go Up
« previous next »