« previous next »
Pages: [1]   Go Down

Author Topic: th350  (Read 2409 times)

Offline 79brent

  • Registered Users
  • *
  • Posts: 126
  • Shake and Bake!
th350
« on: December 06, 2011, 01:26:25 pm »
ok my dad has a th350 that was rebuilt some time ago but it was mounted to the block and the driveshaft so it wasnt "open". would it be still good or do you think the time still ruined all the seals
Logged
1979 Chevy C10 Silverado package. 350/350

"Lifes a garden DIG it"

Offline bake74

  • Senior Member
  • ****
  • Posts: 5871
    • Build Thread
Re: th350
« Reply #1 on: December 07, 2011, 07:06:29 am »
     If it was mounted, and had fluid in it, the only reason that the seals would be no good is if it dried up, and that would take some time to do.  In my opinion you should use the tranny and see if there is any leaks.
Logged
#1: The easiest and most obvious solution to any problem is 99% of the time correct.
#2: There is no such thing as impossible, it just takes longer.
  74 k10, 77k10    Tom
Pages: [1]   Go Up
« previous next »