« previous next »
Pages: [1]   Go Down

Author Topic: Question on door weatherstripping  (Read 4723 times)

Offline 84 chevy guy id

  • Newbie
  • Posts: 41
Question on door weatherstripping
« on: March 15, 2012, 02:12:59 pm »
I have some door weatherstripping, first time I have done this project. Do I need to glue the weatherstripping to the cab or does it just pinch on? I decided I need to get this installed before I put the headliner and trim in.

Mike
« Last Edit: March 19, 2012, 10:24:10 am by Captkaos »
Logged
87 Suburban 6.5 Banks turbo 700/208
87 Blazer 350 700/208
86 Crew Cab soon to be 5.9 4L80E/241
84 Std Cab 400 465/208
72 Vette 468 twin turbo 4L80E

Offline firefighter

  • Frequent Member
  • **
  • Posts: 462
Re: Question on door weatherstripping
« Reply #1 on: March 15, 2012, 02:31:35 pm »
I didn't have to glue my weatherstripping. It slid tight enough onto the pinch weld all around the cab and stays in place just fine.
Logged

Offline PromiseKeeper

  • Frequent Member
  • **
  • Posts: 438
Re: Question on door weatherstripping
« Reply #2 on: March 17, 2012, 03:15:15 pm »
Mine slid on tight too. Even bumped it wih a rubber mallet to get it seated. Inside there was a black silicone like stuff that sealed it onto the pinch weld.
Logged
1980 C-10 2WD short & wide. 305 auto.

Offline DTrain

  • Newbie
  • Posts: 59
  • 1984 Silverado
Re: Question on door weatherstripping
« Reply #3 on: March 17, 2012, 05:07:45 pm »
My headliner is glue to the pinch weld, then my weatherstripping goes on. I dont know what kind of headliner you are using, but I would check into that.
Logged
Pages: [1]   Go Up
« previous next »