« previous next »
Pages: [1]   Go Down

Author Topic: New guy from S flroida  (Read 4538 times)

Offline Twistin10s87

  • Newbie
  • Posts: 7
  • No assisted Twisted
New guy from S flroida
« on: April 02, 2012, 05:24:29 pm »
New to site hello to all

Had a c10 for a few months now just started gettin heavy on it

Dana 60 488s ladder bars moser axles. Coil overs
15x14 rears 15x4.5 fronts funny car cage
Fuel cell 130gph fuel pump
Glass nose hood doors all lexan
Tin dash w gauges and switches

Was honestly wonderin where the vin is located on the frame itself
There's sum numbers under the driver door on chassis any idea how to decode?

Also wonderin if anyones seen this truck in action!
S florida area tracks! I assume

Logged
1973 C10
Ladder bars Dana 60 488s 400 rev w brake
Msd 7al2. K+R switch panel K+R pro cube Glass nose doors all lexan Twin holley black pumps Twin optimas 505 c.i.
Bbc dart pro 1s cnc machined

Offline Captkaos

  • OWNER and Administrator
  • Administrator
  • Senior Member
  • *****
  • Posts: 18461
    • http://www.73-87chevytrucks.com
Re: New guy from S flroida
« Reply #1 on: April 02, 2012, 05:28:11 pm »
This comes up a lot, have you search the site?  The VIN is on top of the frame rail most of the time and can be anywhere from the front to under the cab.
Logged

Offline zieg85

  • Global Moderator
  • Senior Member
  • ****
  • Posts: 7595
    • 73-87 GM squarebody extended cab and conversions up to 91 R/V series
Re: New guy from S flroida
« Reply #2 on: April 02, 2012, 05:30:16 pm »
Welcome from NW Indiana!!! Frame numbers are stamped near the steering box and under the cab on the side as far as I know
Logged
Carl 
1985 C20 Scottsdale 7.4L 4 speed 3.21
1986 C10 under construction
https://www.facebook.com/groups/248658382003506/

Offline Twistin10s87

  • Newbie
  • Posts: 7
  • No assisted Twisted
Re: New guy from S flroida
« Reply #3 on: April 02, 2012, 06:45:14 pm »
Only ones I find are under cab driver n pass side I havnt searched the site yet though I will
The top of the frame was cut under the motor mount plate I've read it is there but not sure
Logged
1973 C10
Ladder bars Dana 60 488s 400 rev w brake
Msd 7al2. K+R switch panel K+R pro cube Glass nose doors all lexan Twin holley black pumps Twin optimas 505 c.i.
Bbc dart pro 1s cnc machined

Offline Blazin

  • Blazin new trails!
  • Senior Member
  • ****
  • Posts: 6130
Re: New guy from S flroida
« Reply #4 on: April 02, 2012, 10:54:55 pm »
Welcome from New Hampshaa!
Logged
Some people are like Slinkies. Not really good for anything, but they still bring a smile to your face when you push them down a flight of stairs

Offline bake74

  • Senior Member
  • ****
  • Posts: 5871
    • Build Thread
Re: New guy from S flroida
« Reply #5 on: April 03, 2012, 05:38:06 am »
     Welcome from California.  Frame vin#'s on these trucks are a mystery, some times they just have partials like both my 74 k10 and 77 k10's.  It depends on where the frame was made and I guess who was doing it that day.   ;D
Logged
#1: The easiest and most obvious solution to any problem is 99% of the time correct.
#2: There is no such thing as impossible, it just takes longer.
  74 k10, 77k10    Tom

Offline Twistin10s87

  • Newbie
  • Posts: 7
  • No assisted Twisted
Re: New guy from S flroida
« Reply #6 on: April 03, 2012, 06:51:07 am »
Well its not a big deal really just lookin for history on it....really lookin for an ideal weight
Its a drag truck w no title
Logged
1973 C10
Ladder bars Dana 60 488s 400 rev w brake
Msd 7al2. K+R switch panel K+R pro cube Glass nose doors all lexan Twin holley black pumps Twin optimas 505 c.i.
Bbc dart pro 1s cnc machined

Offline 1982 Daily Driver

  • Junior Member
  • ***
  • Posts: 549
Re: New guy from S flroida
« Reply #7 on: April 03, 2012, 02:15:31 pm »
Welcome from South Carolina
Logged
Pages: [1]   Go Up
« previous next »