« previous next »
Pages: [1]   Go Down

Author Topic: Replacing Oil Pan Gasket  (Read 2419 times)

Offline K20Blue1982

  • Newbie
  • Posts: 3
Replacing Oil Pan Gasket
« on: August 30, 2013, 03:17:15 pm »
Hey guys new to the forum, just got a 1982 K20 with a 350. I have a small leak from my oil pan and was wondering how hard it will be to change. I already have the gasket, just was looking at the bolts on the pan and do I have to take off anything to get all the bolts out? It looks like a piece of the transmission is blocking me from getting at two bolts for the pan. Thanks for any help.
« Last Edit: August 30, 2013, 07:38:27 pm by bd »
Logged

Offline K20Blue1982

  • Newbie
  • Posts: 3
Re: Replacing Oil Pan Gasket
« Reply #1 on: August 30, 2013, 05:13:36 pm »
Alright I got the pan off, do I have to take the timing cover off the change the front seal?
Logged

Offline zieg85

  • Global Moderator
  • Senior Member
  • ****
  • Posts: 7597
    • 73-87 GM squarebody extended cab and conversions up to 91 R/V series
Re: Replacing Oil Pan Gasket
« Reply #2 on: August 30, 2013, 06:00:12 pm »
Quote from: K20Blue1982 on August 30, 2013, 05:13:36 pm
Alright I got the pan off, do I have to take the timing cover off the change the front seal?

No just dig it out with a small flat blade screwdriver.  Be sure to use a dab of silicone on the corners.
Logged
Carl 
1985 C20 Scottsdale 7.4L 4 speed 3.21
1986 C10 under construction
https://www.facebook.com/groups/248658382003506/

Offline K20Blue1982

  • Newbie
  • Posts: 3
Re: Replacing Oil Pan Gasket
« Reply #3 on: September 09, 2013, 10:13:18 pm »
Thanks and ya installed it with no leaks
Logged
Pages: [1]   Go Up
« previous next »