Help w/ codes

[dc7432]

87 350 TBI has new radiator, and distributor and everything's is stock. Truck Boggs on acceleration and the CEL came on (on had for two weeks) and I jumped the ALDL and believe I got 33, 44 and 45 I believe the last two are related to the O2 sensor maybe it's bad? Any thoughts thanks

[dc7432]

I just noticed the EGR wasn't connected I connected and it didn't want to go loaded up a lot so I disconnected

[bd]

33 MAP - low vacuum
44 O₂ - lean
45 O₂ - rich

I just noticed the EGR wasn't connected I connected and it didn't want to go loaded up a lot so I disconnected

You may have the vacuum lines to MAP and EGR reversed.  MAP requires constant manifold vacuum, EGR requires ported vacuum controlled by a solenoid valve that mounts near the passenger side of the TBI, next to the MAP sensor.

If your O₂ sensor is original, replace it.  Make sure that the brown and black EMS ground wires are properly attached to the back of the right cylinder head and to the intake manifold by the thermostat, respectively.