« previous next »
Pages: [1]   Go Down

Author Topic: edel 8030  (Read 3149 times)

Offline 75_chevy

  • Registered Users
  • *
  • Posts: 181
  • Newbie
edel 8030
« on: January 28, 2014, 04:54:10 pm »
is this supposed to mount to the intake? ever since I swapped carbs my linkage has been a little screwy and I couldn't get the pedal into full throttle as it was hanging up on the throttle kickdown cable. so I got this bracket but I can't seem to find where to mount it. looked everywhere maybe I'm just being an idiot but I'm not getting it.. :(


Sent from my iPhone using Tapatalk
Logged

Offline bd

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 6602
Re: edel 8030
« Reply #1 on: January 28, 2014, 07:25:10 pm »
Fastens under the two rear intake manifold bolts, driver's side.  Quite often, aftermarket brackets won't provide a perfect mounting or alignment solution for the cables without some tweaking.
Logged
Rich
It's difficult to know just how much you don't know until you know it.
In other words... if people learn by making mistakes, by now I should know just about everything!!!
87 R10 Silverado Fleetside 355 MPFI 700R4 3.42 Locker (aka Rusty, aka Mater)

Offline 75_chevy

  • Registered Users
  • *
  • Posts: 181
  • Newbie
Re: edel 8030
« Reply #2 on: January 28, 2014, 08:57:12 pm »
dang good to know thank you for the reply


Sent from my iPhone using Tapatalk
Logged

Offline Irish_Alley

  • Tim
  • Senior Member
  • ****
  • Posts: 13333
  • Family is not an important thing. It's everything.
Re: edel 8030
« Reply #3 on: January 28, 2014, 11:21:52 pm »
i have had to bend brackets to make them work.
Logged
If you can’t tell yourself the truth, who can you tell it to?~Irish_Alley

When you have eliminated the impossible, whatever remains, however improbable, must be the truth ~Sherlock Holmes

Offline 75_chevy

  • Registered Users
  • *
  • Posts: 181
  • Newbie
Re: edel 8030
« Reply #4 on: January 29, 2014, 12:56:49 pm »
how far off were they?


Sent from my iPhone using Tapatalk
Logged

Offline 75_chevy

  • Registered Users
  • *
  • Posts: 181
  • Newbie
Re: edel 8030
« Reply #5 on: January 29, 2014, 04:11:53 pm »
got it


Sent from my iPhone using Tapatalk
Logged

Offline bd

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 6602
Re: edel 8030
« Reply #6 on: January 29, 2014, 05:26:33 pm »
Looks good!
Logged
Rich
It's difficult to know just how much you don't know until you know it.
In other words... if people learn by making mistakes, by now I should know just about everything!!!
87 R10 Silverado Fleetside 355 MPFI 700R4 3.42 Locker (aka Rusty, aka Mater)

Offline 75_chevy

  • Registered Users
  • *
  • Posts: 181
  • Newbie
Re: edel 8030
« Reply #7 on: January 30, 2014, 11:49:45 pm »
thanks! running so much better now too


Sent from my iPhone using Tapatalk
Logged
Pages: [1]   Go Up
« previous next »