« previous next »
Pages: [1]   Go Down

Author Topic: LS3 525hp with 4L70E  (Read 5343 times)

Offline 79K10Crusher

  • Newbie
  • Posts: 31
LS3 525hp with 4L70E
« on: September 17, 2014, 09:50:49 PM »
Just ordered my LS3 from Pace Performance.  I'm trying to make sure I get all the parts I need.  I know capt and a few others have already done these LS swaps.  Going in a 1985 C10 Silverado short bed.  I ordered a be cool rad with dual fans.  Dirty dingo motor mounts with one inch set back.  New tube transmission crossmember.  Holley fuel pump with braided lines and AN fittings.  This is going to be the connect and cruise package so it has the controllers with it.  March serpentine system for the front.  All of this should be here by next week.  Feel free to chime in and let me know if I'm missing something. Thanks, Brandon.
Logged

Offline Irish_Alley

  • Tim
  • Senior Member
  • ****
  • Posts: 13327
  • Family is not an important thing. It's everything.
Re: LS3 525hp with 4L70E
« Reply #1 on: September 17, 2014, 11:52:54 PM »
why a 4l70 why not 4l80?
Logged
If you can’t tell yourself the truth, who can you tell it to?~Irish_Alley

When you have eliminated the impossible, whatever remains, however improbable, must be the truth ~Sherlock Holmes

Offline 79K10Crusher

  • Newbie
  • Posts: 31
Re: LS3 525hp with 4L70E
« Reply #2 on: September 18, 2014, 07:49:23 PM »
That's what comes with it. 
Logged

Offline Irish_Alley

  • Tim
  • Senior Member
  • ****
  • Posts: 13327
  • Family is not an important thing. It's everything.
Re: LS3 525hp with 4L70E
« Reply #3 on: September 18, 2014, 10:47:45 PM »
lol oh
Logged
If you can’t tell yourself the truth, who can you tell it to?~Irish_Alley

When you have eliminated the impossible, whatever remains, however improbable, must be the truth ~Sherlock Holmes

Offline 79K10Crusher

  • Newbie
  • Posts: 31
Re: LS3 525hp with 4L70E
« Reply #4 on: September 22, 2014, 11:28:52 PM »
Not many replys for help huh..
Logged

Offline Don5

  • Registered Users
  • *
  • Posts: 229
  • Newbie
Re: LS3 525hp with 4L70E
« Reply #5 on: September 22, 2014, 11:39:01 PM »
Sorry, I can't help. I stayed with a small block.  Best of luck on your build though.
Logged
It's been a LONG time since I have been called a newbie. Just sayin....

1979 GMC K15 355, SM 465, 205, 3.73 Dana 44 with a Spartan Locker, 12 bolt Eaton limited slip and 6 inch lift with 36 x 12.50 Super Swamper TSL's.

Offline fitz

  • Senior Member
  • ****
  • Posts: 2085
Re: LS3 525hp with 4L70E
« Reply #6 on: October 01, 2014, 05:13:37 AM »
Are you going to document the build here?
I'd be interested in following along.
I think a few members here have done LS swaps, but not many.
At a cost of $13,000 for the LS3 connect & cruise set up, I'm guessing your the first member here to install one.
Good luck with the project.
Logged

Offline Captkaos

  • OWNER and Administrator
  • Administrator
  • Senior Member
  • *****
  • Posts: 18403
    • http://www.73-87chevytrucks.com
Re: LS3 525hp with 4L70E
« Reply #7 on: October 09, 2014, 08:35:53 PM »
What are you doing for speedo?  Are you running a Holley external pump?  I wouldn't....  Are you running AN front to back?  Did you get the Conversion fittings for the saddle tank/s to adapt the lines?
All I can think of right off hand...
Logged
Pages: [1]   Go Up
« previous next »