« previous next »
Pages: [1]   Go Down

Author Topic: Issue At Wheel(s)  (Read 3569 times)

Offline cwilson jr

  • Registered Users
  • *
  • Posts: 197
Issue At Wheel(s)
« on: August 04, 2015, 06:43:12 pm »
I have an 85 K10 with a 305 auto.

I started hearing a clanging sound coming from the right side of the vehicle a while back.  Im not sure at all, but if i had to guess, i would say it seems like the front.  It almost sounds like a chain rattiling.  I notice it most, if not in its entirety while at slower speeds.  This is probably just because I can't hear it while cruising.

Also, while parallel parking, there is something going on with one of the wheels, I notice this while cutting the wheel and trying to backup,  there is a loud chirping/squealing and I feel what I would call wheel hop and makes it more difficult then it needs to be.

I hardly use 4wheel, but I put it in the other day to see hiw it is and the wheel hop and steering seem awful, but the 4wheel still seems to be functioning, and after I did this, it seems like the issues previously mentioned, got worse/louder.  Not sure.
Logged

Offline zieg85

  • Global Moderator
  • Senior Member
  • ****
  • Posts: 7595
    • 73-87 GM squarebody extended cab and conversions up to 91 R/V series
Re: Issue At Wheel(s)
« Reply #1 on: August 04, 2015, 06:49:32 pm »
Front axle u-joints bind and cause all kinds of noise when bad
Logged
Carl 
1985 C20 Scottsdale 7.4L 4 speed 3.21
1986 C10 under construction
https://www.facebook.com/groups/248658382003506/

Offline gunrac

  • Frequent Member
  • **
  • Posts: 274
Re: Issue At Wheel(s)
« Reply #2 on: August 04, 2015, 09:10:52 pm »
yep.........wat he said
Logged
Never Apologize..........as it shows signs of weakness

Offline cwilson jr

  • Registered Users
  • *
  • Posts: 197
Re: Issue At Wheel(s)
« Reply #3 on: September 21, 2015, 02:25:15 pm »
I am going to look into the u-joint and probably replace it, and as far as the wheel "chirping", I think this is a seperate issue. I noticed not even just while parking, but in park, when i cut the wheel sharply to one side, and maybe both, there is a loud squealing/chirping sound coming from the front driver's wheel and continues while in that position until i would turn it back slightly.  (There is contact point, to where everything is fine and the loud squealing/chirping begins.)

Does this sound like the wheel bearing?  I thought that would be something I noticed while driving.  I jacked the problem side up and the wheel MIGHT have moved a hair.  I have 4-wheel with auto lockers.

Logged

Offline Blazin

  • Blazin new trails!
  • Senior Member
  • ****
  • Posts: 6130
Re: Issue At Wheel(s)
« Reply #4 on: September 21, 2015, 08:28:48 pm »
The squealing while turning isn't the belt is it?
The snapping noise is most probably an axle joint. By the sounds of it you have let it go a while. Good chance the axles are wrecked now too.
Logged
Some people are like Slinkies. Not really good for anything, but they still bring a smile to your face when you push them down a flight of stairs

Offline Irish_Alley

  • Tim
  • Senior Member
  • ****
  • Posts: 13333
  • Family is not an important thing. It's everything.
Re: Issue At Wheel(s)
« Reply #5 on: September 23, 2015, 09:01:40 am »
take the lockers off and see what it does but dont drive on a dirt road. sounds like theyre locked
Logged
If you can’t tell yourself the truth, who can you tell it to?~Irish_Alley

When you have eliminated the impossible, whatever remains, however improbable, must be the truth ~Sherlock Holmes
Pages: [1]   Go Up
« previous next »