« previous next »
Pages: [1]   Go Down

Author Topic: Bracket help  (Read 2161 times)

Offline Mitch2372

  • Newbie
  • Posts: 12
  • Newbie
Bracket help
« on: April 02, 2016, 08:52:15 pm »
Can anyone id to bracket?  It is off of an 85 K1500 with 305, AC, PS, and smog. 
Logged

Offline bd

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 6600
Re: Bracket help
« Reply #1 on: April 02, 2016, 09:50:48 pm »
Possibly a mounting bracket for an air management (diverter) valve, mounting at the right front corner of the right cylinder head.  I'm guessing the closed bolt hole shares the front exhaust manifold bolt and the elongated open hole is caged between the alternator and the cylinder head and retained by the alternator pivot bolt.  But, that's just a WAG.
Logged
Rich
It's difficult to know just how much you don't know until you know it.
In other words... if people learn by making mistakes, by now I should know just about everything!!!
87 R10 Silverado Fleetside 355 MPFI 700R4 3.42 Locker (aka Rusty, aka Mater)

Offline 78BIG-TEN

  • Frequent Member
  • **
  • Posts: 261
  • Newbie
Re: Bracket help
« Reply #2 on: April 14, 2016, 07:01:32 pm »
I think it could be for p\s pump.Maybe goes over studs on back of pump that holds the reservoir on.
Single hole to side of block.The slotted part is where pressure line comes thru.Something to look at anyway
Logged
Pages: [1]   Go Up
« previous next »