Just picked this up

[Dan75k20]

Just bought an1987 r10 bell tech spindles and springs flip kit in the rear 6 front 8in rear drop  blown up 305 and 700 r4 is good it came with the 89 k1500. With a good 350 tbi i have a 87 v10 computer and lots of tbi stuff so i should be good to go! My 75 k20needs work  the floors and cab supports along with the inner rockers need replaced and needs body work i have a nice front clip and will paint my 75 blue and silver.

Sent from my LG-H811 using Tapatalk

[Dan75k20]

The last picture is the 87r 10 i bought.

Sent from my LG-H811 using Tapatalk

[Dan75k20]

Sent from my LG-H811 using Tapatalk

[Dan75k20]

I started pulling the donor truck apart last night. For the 350

Sent from my LG-H811 using Tapatalk

[Dan75k20]

i have the 350 out of the donor found out its out of a 95 by the casting number. I have to get it on a stand to change gaskets while its out .I had to move to a new shop and have been busy with work. It is coming along. I am going to pull the bed i have another bed coming. i can sandblast and paint the frame i also have mini c notches for the truck so while its apart why not! Do things right!


Sent from my LG-H811 using Tapatalk

[Dan75k20]

i also sold the bench seat in favor of the 90s blazer/suburban buckets when install i will do a write up in the interior section of how i mounted them i set them in today

Sent from my LG-H811 using Tapatalk