« previous next »
Pages: [1]   Go Down

Author Topic: A/C heater blower motor housing gasket  (Read 3656 times)

Offline Pike1915

  • Newbie
  • Posts: 53
  • Trying to kept my sanity
A/C heater blower motor housing gasket
« on: July 13, 2016, 06:19:04 pm »
I have a 1974 k10.  I have NO a/c..  I had to replace the heater core in which I had to take off the blower motor housing..  I had to pry off cause of a gasket.  My question is there a gasket for it or did someone just make one for it.  Stupid auto parts guy had no clue.. 
Logged

Offline cvbear

  • Registered Users
  • *
  • Posts: 196
Re: A/C heater blower motor housing gasket
« Reply #1 on: July 13, 2016, 09:03:49 pm »
The Blower Motor goes on the housing in the engine compartment with a gasket.  I destroyed mine when I replace the blower motor.  A little RTV sealed it fine.  I am not aware of anyone that reproduces the gasket.
Logged
1984 SWB Silverado fleetside, 350 crate engine, 350 trans

Offline winky

  • Junior Member
  • ***
  • Posts: 509
Re: A/C heater blower motor housing gasket
« Reply #2 on: July 13, 2016, 10:01:23 pm »
this is what i use.

https://www.amazon.com/Dicor-BT-1834-1-Butyl-Seal-Tape/dp/B001FCB4JS

great for sealing all kinds of things like that
Logged

Offline ron350

  • Newbie
  • Posts: 43
Re: A/C heater blower motor housing gasket
« Reply #3 on: July 16, 2016, 01:00:13 am »
3M 08578 black strip calk is what the Chevy dealership uses here. The only problem is you have to buy so much of the stiff.

https://www.amazon.com/3M-08578-Black-Strip-Calk/dp/B000PEZ1L4/ref=sr_1_1?s=automotive&ie=UTF8&qid=1468647889&sr=1-1&keywords=3M+black+calk+strips 

Logged
1975 C10 step side stock with 350 two bbl. & 350 trans.
Pages: [1]   Go Up
« previous next »