« previous next »
Pages: [1]   Go Down

Author Topic: 85 chevy crew cab 1 ton brakes not fitting.  (Read 4934 times)

Offline thelincolnguy

  • Newbie
  • Posts: 43
  • Newbie
85 chevy crew cab 1 ton brakes not fitting.
« on: June 27, 2016, 12:01:19 pm »
hello i have an 85 camper special with pin type caliper spindles. bought the truck with no front brakes and bought new brake rotors/ pads/ bearings/ calipers. calipers fit without the pads but when trying to install pads it seems as if the pads or rotor  are too thick. even tried the 3/4 ton truck pads still not fitting. can post pic if needed. thanks!!
Logged
Thelincolnguy

Offline big_al273

  • Registered Users
  • *
  • Posts: 207
  • Newbie
Re: 85 chevy crew cab 1 ton brakes not fitting.
« Reply #1 on: June 27, 2016, 06:36:36 pm »
are the pistons in the calipers compressed? if they are extended they can cause what you seem to be describing
Logged
91 Chevy R3500 Crewcab future project
89 GMC R3500 Cab & Chassis Tool truck project
88 Chevy V30 Crewcab Ex-firetruck
87 Chevy R20 Crewcab future project
84 GMC K1500 winter beater

Offline thelincolnguy

  • Newbie
  • Posts: 43
  • Newbie
Re: 85 chevy crew cab 1 ton brakes not fitting.
« Reply #2 on: June 28, 2016, 11:50:12 am »
yes they are brand new calipers with the pistons fully compressed.
Logged
Thelincolnguy

Offline 1967KaiserM715

  • Junior Member
  • ***
  • Posts: 914
  • 1985 GMC K1500 w/ 6.5 TD
Re: 85 chevy crew cab 1 ton brakes not fitting.
« Reply #3 on: June 28, 2016, 11:53:04 am »
They apparently make 2 different sets of calipers/rotor sets for the dually, so the parts guy probably screwed up and gave you the thicker rotors, but the calipers for the thinner rotors. Is your rotor about an inch and a half wide?

Sent from my LGL34C using Tapatalk

Logged
Current Vehicles:1985 GMC K10(Daily) 1991 GMC K2500(Daily) 1975 Beetle(not running) 1985 Mercedes 300D(not running) 1952 M35    1967 M715(not running)
 1986 Chevy K30(under repair)

Offline thelincolnguy

  • Newbie
  • Posts: 43
  • Newbie
Re: 85 chevy crew cab 1 ton brakes not fitting.
« Reply #4 on: June 28, 2016, 03:24:36 pm »
Yes rotor is exactly 1.5. And truck has the pin type caliper mounting. Had slide spindle on one side when i bouthg it. But i found another pin type spindle and installed
Logged
Thelincolnguy

Offline 1967KaiserM715

  • Junior Member
  • ***
  • Posts: 914
  • 1985 GMC K1500 w/ 6.5 TD
Re: 85 chevy crew cab 1 ton brakes not fitting.
« Reply #5 on: June 28, 2016, 09:09:54 pm »
I realize I wrote dually, I meant 1 ton, but my brothers 86 was the same way, I'll try to find the part numbers for the rotor changes and caliper changes


Sent from my iPhone using Tapatalk
Logged
Current Vehicles:1985 GMC K10(Daily) 1991 GMC K2500(Daily) 1975 Beetle(not running) 1985 Mercedes 300D(not running) 1952 M35    1967 M715(not running)
 1986 Chevy K30(under repair)

Offline thelincolnguy

  • Newbie
  • Posts: 43
  • Newbie
Re: 85 chevy crew cab 1 ton brakes not fitting.
« Reply #6 on: July 24, 2016, 08:06:38 pm »
Ok. Thank you!!
Logged
Thelincolnguy

Offline Irish_Alley

  • Tim
  • Senior Member
  • ****
  • Posts: 13333
  • Family is not an important thing. It's everything.
Re: 85 chevy crew cab 1 ton brakes not fitting.
« Reply #7 on: July 27, 2016, 01:09:38 pm »
what am i missing? it should have the shim type for the dana 60 which should be on most 1 tons. take some pictures if you dont mind
Logged
If you can’t tell yourself the truth, who can you tell it to?~Irish_Alley

When you have eliminated the impossible, whatever remains, however improbable, must be the truth ~Sherlock Holmes

Offline thelincolnguy

  • Newbie
  • Posts: 43
  • Newbie
Re: 85 chevy crew cab 1 ton brakes not fitting.
« Reply #8 on: July 30, 2016, 08:01:16 am »
Ok tim give me a couple days to take pics as i am moving currently
Logged
Thelincolnguy
Pages: [1]   Go Up
« previous next »