Author Topic: WillSquared's 86 C10  (Read 6861 times)

Offline WillSquared

  • Newbie
  • Posts: 55
WillSquared's 86 C10
« on: April 08, 2015, 06:27:35 PM »
I figured it was about time for me to add my truck to the build section.  It will be very slow going as sadly I'm poor and its my daily driver for now.  I bought the truck about a year ago from an older gentlemen here locally who was the second owner.  Ill list out the specs and couple pics I have of it so far and update soon with others.

1986 Chevrolet C10
Black/Silver two tone, Black interior
128xxx miles
350 V8 (GM Goodwrench crate with under 5k on it, originally a 305)
Turbo 350 tranny
10 bolt rear, 3.08 open

My plans for it are to restore it as I go a little at a time.  I am planning a restomod approach, lower it a bit, cowl hood and such to make it a little sportier looking.

Here is a pic the day I brought it home...


Brightened up the engine bay a bit a few months ago and added some long tube headers with a Flowmaster 50 SUV dual in/out muffler...


And todays latest mod was I changed out the old rusted, diamond tread step bumper for this bad boy...


I have quite a few things waiting here in the house to add in the coming weeks.

Edelbrock Performer Intake w/ Edelbrock 600cfm carb
Dakota Digital VHX gauges
GMTilt rebuilt steering column
New grille/bowtie

Thanks for looking and Ill update with more pics of other stuff Ive done up to now as i take them.
1986 Chevrolet C10

Offline cvbear

  • Registered Users
  • *
  • Posts: 196
Re: WillSquared's 86 C10
« Reply #1 on: April 08, 2015, 07:41:39 PM »
Nice looking truck, very clean.  I can tell you take a great deal of pride in it.  Welcome to the site, lots of good folks on here.
1984 SWB Silverado fleetside, 350 crate engine, 350 trans

Offline BBM3

  • Frequent Member
  • **
  • Posts: 326
Re: WillSquared's 86 C10
« Reply #2 on: April 08, 2015, 11:52:01 PM »
Nice truck.
It looks close to an original.
If it were mine I would work to restore it to as built condition rather than mod it.

Original square body's are becoming hard to find. Modified are a dime a dozen.
Whatever you choose to do you have a great starting point.
Have fun.

Offline WillSquared

  • Newbie
  • Posts: 55
Re: WillSquared's 86 C10
« Reply #3 on: April 19, 2015, 02:32:25 PM »
Yesterday I got my new intake/carb put on...went with Edelbrock Performer EPS intake and Edelbrock 600cfm carb...

1986 Chevrolet C10

Online bd

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 6549
Re: WillSquared's 86 C10
« Reply #4 on: April 19, 2015, 03:20:17 PM »
Very nicely executed.  And, CLEAN!   8)
Rich
It's difficult to know just how much you don't know until you know it.
In other words... if people learn by making mistakes, by now I should know just about everything!!!
87 R10 Silverado Fleetside 355 MPFI 700R4 3.42 Locker (aka Rusty, aka Mater)

Offline WillSquared

  • Newbie
  • Posts: 55
Re: WillSquared's 86 C10
« Reply #5 on: April 25, 2015, 07:23:44 PM »
Well I got the new linkage on so the carb is now correctly installed.  Then I got my new grille and blinker solution in...






Sent from my iPhone using Tapatalk
1986 Chevrolet C10

Offline WillSquared

  • Newbie
  • Posts: 55
Re: WillSquared's 86 C10
« Reply #6 on: December 10, 2016, 08:43:32 PM »
So today I added some new wheels and tires.  18x8 MB Old School wheels and 255/55R18 rubber.  Really pleased with the proportions and look.  Next round of mods will be all new bushings/body mounts and new coils and leaf springs with new shocks and a 3/5 djm lowering kit.








Sent from my iPhone using Tapatalk
1986 Chevrolet C10

Offline 1967KaiserM715

  • Junior Member
  • ***
  • Posts: 914
  • 1985 GMC K1500 w/ 6.5 TD
Re: WillSquared's 86 C10
« Reply #7 on: December 10, 2016, 08:46:43 PM »
That truck will look great lowered with those rims! Good work.


Sent from my iPhone using Tapatalk
Current Vehicles:1985 GMC K10(Daily) 1991 GMC K2500(Daily) 1975 Beetle(not running) 1985 Mercedes 300D(not running) 1952 M35    1967 M715(not running)
 1986 Chevy K30(under repair)