« previous next »
Pages: [1]   Go Down

Author Topic: TBI in 86  (Read 2786 times)

Offline psyborgg

  • Newbie
  • Posts: 8
  • Newbie
TBI in 86
« on: July 27, 2019, 09:57:39 pm »
Is there any information about installation and the wiring process of the TBI 454/400 into an 86 carb truck ? Has anyone had success with kits such as painless or others? Any help will be appreciated.
« Last Edit: July 27, 2019, 10:03:30 pm by psyborgg »
Logged

Offline Irish_Alley

  • Tim
  • Senior Member
  • ****
  • Posts: 13333
  • Family is not an important thing. It's everything.
Re: TBI in 86
« Reply #1 on: August 01, 2019, 10:45:06 pm »
the motor should be on a separate wiring harness that goes into the passengers side firewall for the most part. i would try to get a donor and use that harness, would be much easier and cheaper than painless.
Logged
If you can’t tell yourself the truth, who can you tell it to?~Irish_Alley

When you have eliminated the impossible, whatever remains, however improbable, must be the truth ~Sherlock Holmes

Offline Stewart G Griffin

  • Senior Member
  • ****
  • Posts: 3324
Re: TBI in 86
« Reply #2 on: August 03, 2019, 11:57:39 am »
Might want to check out:
https://howellefi.com/

Seems like the easiest/fastest (although not cheapest) way to go.

i'm pretty sure Bill Howell worked at GM on the original TBI system so.....
Logged
Pages: [1]   Go Up
« previous next »