Author Topic: Edelbrock Carb help needed  (Read 3322 times)

Offline Shifty

  • Senior Member
  • ****
  • Posts: 1060
  • I bleed Bowtie red...
Re: Edelbrock Carb help needed
« Reply #15 on: October 17, 2024, 10:25:54 AM »
You can get the check valve (1/4" female pipe threaded) in NAPA Fuel Pumps p/n# a0001q, or Delphi p/n# fa10016, but I think its all in the carb, which will be full of what looks like sand, but it's the ethanol-heavy fuels' effect.   >:(
87 V20 Standard Cab Longbed (current)

87 R30 3+3 Longbed (days of yore)

98 C2500 ext cab longbed

Online Mr Diesel

  • Frequent Member
  • **
  • Posts: 353
  • Aaron
Re: Edelbrock Carb help needed
« Reply #16 on: October 17, 2024, 12:24:31 PM »
I like those parts you referenced. Found a Carter version on Ebay and ordered it too. All look much better than anything I've found locally.
1976 C20 Crewcab, 6.2L/SM465
1982 K30 Crewcab , 427TD/TH400
1983 C30, 6.2L/TH400
1983 K30 Crewcab 454/700R4
1986 K10 350/400. 1989 K30 cab/chassis 454/SM465

Offline Shifty

  • Senior Member
  • ****
  • Posts: 1060
  • I bleed Bowtie red...
Re: Edelbrock Carb help needed
« Reply #17 on: October 17, 2024, 01:43:50 PM »
I like the fact that they don't have built-in nipples so that you can can change sizes, use 45 or 90 degree fittings, or even A/N fittings, or with inverted-seat adapters, can plumb into steel line. 
87 V20 Standard Cab Longbed (current)

87 R30 3+3 Longbed (days of yore)

98 C2500 ext cab longbed