« previous next »
Pages: [1]   Go Down

Author Topic: c10 gauge cluster swap  (Read 8026 times)

Offline mort2202

  • New Users
  • Posts: 1
c10 gauge cluster swap
« on: January 31, 2007, 06:20:00 am »
hi,i'd like to swap out my non tach 1984 gauge cluster for a 1977 gauge cluster with tach. does anyone know where to obtain wiring schematics for these two chev 1/2 tons.?

Logged

Offline Tire Burner

  • Newbie
  • Posts: 27
Re: c10 gauge cluster swap
« Reply #1 on: January 31, 2007, 06:22:00 am »
brochures.slosh.com/index.shtml?1986

Try this site. I used it when i put in my Autometer Gauges. You'll have to click "Wiring" Under the Heading "Technical Info"

Logged

Offline roundedline

  • Administrator
  • Senior Member
  • *****
  • Posts: 2228
Re: c10 gauge cluster swap
« Reply #2 on: January 31, 2007, 08:54:00 am »
Any Haynes manual from AutoZone will have the schematics, or the Helms manuals for these trucks will have them.

Going from the 84 to the 77 you are going to be doing alot of wiring changes.  The 77 uses mechanical oil pressure senders.  A plug n play model would have been any 78-up.

Chris Lucas
www.73-87chevytrucks.com
www.captkaoscustoms.com
Project Su
Jimmy 2WD Project

Logged

Offline joesgarage71

  • Wrench
  • Senior Member
  • ****
  • Posts: 1156
Re: c10 gauge cluster swap
« Reply #3 on: February 01, 2007, 09:55:00 am »
Autozone also has wiring info click on repair info.
Steve

Logged
78' K-20 355/SM465/twin stick 205 6" on 36's
14 bolt FF/big bearing Dana 44 4.56 gears
92' GMC C-1500 454/4L80E/14 bolt
Pages: [1]   Go Up
« previous next »