« previous next »
Pages: [1]   Go Down

Author Topic: Camaro Posi to 81 C10  (Read 4970 times)

Offline 81Cheyenne

  • Registered Users
  • *
  • Posts: 103
Camaro Posi to 81 C10
« on: January 25, 2008, 07:31:16 am »
I've found a posi rear end on Craig's List that has come out of an '89 IROC camaro.  It also has disc brakes. Can I use the internals from it to convert the 10 bolt on my 81 C10 to posi? How about the disc brake setup, will that bolt up to my rear end?
Logged

Offline HAULIN IT

  • Senior Member
  • ****
  • Posts: 1542
Re: Camaro Posi to 81 C10
« Reply #1 on: January 25, 2008, 08:37:58 am »
Cheyenne, The short answer is: No & No. Wrong axle group, the '89 Camaro didn't have a 8.5 10 Bolt, which is what would be in your truck if it hasn't been changed.
Logged

Offline 81Cheyenne

  • Registered Users
  • *
  • Posts: 103
Re: Camaro Posi to 81 C10
« Reply #2 on: January 25, 2008, 08:41:02 am »
Well that makes things simple  :). Thanks.
Logged

Offline HAULIN IT

  • Senior Member
  • ****
  • Posts: 1542
Re: Camaro Posi to 81 C10
« Reply #3 on: January 25, 2008, 08:43:31 am »
Boy, Something I do causes me to POST when I don't want to, Does hitting the cont. key do this? Anyway, the disc brake brackets will not bolt up,the  (4) bolt pattern at the housing flange is not the same & the wheel lug pattern is not the same on the rotor. Lorne
Logged
Pages: [1]   Go Up
« previous next »