« previous next »
Pages: [1]   Go Down

Author Topic: Tire size question for 3/4 ton....  (Read 4449 times)

Offline Laderhosen

  • Frequent Member
  • **
  • Posts: 272
Tire size question for 3/4 ton....
« on: February 27, 2009, 02:15:37 pm »
I have an 82 C20 3/4 ton. It's got the stock 16 inch 8 stud steel wheels on at the mo. I'm planning on getting them widened either to 8 or 9 inch (maybe 8 front and 9 back). What size tires would you suggest?? Show me pics of what you got....  ;D

It's running at standard ride height at the moment, I had considered lowering it, but it'll only be a moderate one if I do, due to practical reasons.... the reason I mention this is I'm most concerned about the cosmetics and the wheels looking the right size in the arches.
« Last Edit: February 27, 2009, 05:07:08 pm by Laderhosen »
Logged
'82 3/4 ton, 350, th400,
'88 K5 Blazer, 350, 700R4
’98 BMW 328i daily drive
’91 VW Golf Mk 2 with VR6 conv

Offline Laderhosen

  • Frequent Member
  • **
  • Posts: 272
Re: Tire size question for 3/4 ton....
« Reply #1 on: March 19, 2009, 11:50:09 am »
bump....  ::)
Logged
'82 3/4 ton, 350, th400,
'88 K5 Blazer, 350, 700R4
’98 BMW 328i daily drive
’91 VW Golf Mk 2 with VR6 conv

Offline Irish_Alley

  • Tim
  • Senior Member
  • ****
  • Posts: 13333
  • Family is not an important thing. It's everything.
Re: Tire size question for 3/4 ton....
« Reply #2 on: March 19, 2009, 04:36:51 pm »
i have 16x16 on mine  ;)
Logged
If you can’t tell yourself the truth, who can you tell it to?~Irish_Alley

When you have eliminated the impossible, whatever remains, however improbable, must be the truth ~Sherlock Holmes

Offline 78 Chevyrado

  • Z62 ON-ROAD
  • Site Supporters
  • Senior Member
  • ******
  • Posts: 2748
    • My Photobucket Site
Re: Tire size question for 3/4 ton....
« Reply #3 on: March 20, 2009, 10:47:24 pm »
Stock height '78 c20

16x7 wheels
265/75/16 tires  -  10.4 inches wide, aprrox. 31.5 to 32 inches tall.


[/img]
« Last Edit: March 20, 2009, 10:52:36 pm by 78 Chevyrado »
Logged
Kenny

1978 C-20, 350/400, 3.73, Graystone Metallic, Raceline Renegade 8 Wheels - 18x8.5, 275/70R18 BFG KO's

Offline Trukk

  • Newbie
  • Posts: 20
Re: Tire size question for 3/4 ton....
« Reply #4 on: March 21, 2009, 12:11:22 am »
Quote
Stock height '78 c20

16x7 wheels
265/75/16 tires  -  10.4 inches wide, aprrox. 31.5 to 32 inches tall.

I just put the same size tire on my 2wd C20 1978 stock height, except on 16x8 wheels with 4" backspacing. Tires are Goodyear Armors. It's perfect. 33"s would come very close to hitting the front fender bottoms when turning. I didnt figure this out myself - I read it here in an old post. THANKS GUYS !!!

 ;D ;D ;D ;D
Logged
Pages: [1]   Go Up
« previous next »