« previous next »
Pages: [1]   Go Down

Author Topic: axel swap  (Read 3003 times)

Offline ucstepside

  • Newbie
  • Posts: 17
axel swap
« on: February 10, 2010, 08:14:05 pm »
I starting to restore a  78 4x4 stepside.  Can I swap axels from a 87 4x4? Both are 1/2 tons

thanks 
Logged

Offline Irish_Alley

  • Tim
  • Senior Member
  • ****
  • Posts: 13333
  • Family is not an important thing. It's everything.
Re: axel swap
« Reply #1 on: February 10, 2010, 10:58:30 pm »
yes but you have to make sure the ratio on the new match the old, well they don't have to  match but it will mess up the speed and you will just have to set it up to ur new ratio.nothe thing ur u joints may be different not sure but if they are go to napa and they will help u out advoid autozone and advance for custom parts
Logged
If you can’t tell yourself the truth, who can you tell it to?~Irish_Alley

When you have eliminated the impossible, whatever remains, however improbable, must be the truth ~Sherlock Holmes

Offline joesgarage71

  • Wrench
  • Senior Member
  • ****
  • Posts: 1156
Re: axel swap
« Reply #2 on: February 19, 2010, 07:46:15 am »
If your using both axels from the 87 don't worry about the gears matching.
Logged
78' K-20 355/SM465/twin stick 205 6" on 36's
14 bolt FF/big bearing Dana 44 4.56 gears
92' GMC C-1500 454/4L80E/14 bolt
Pages: [1]   Go Up
« previous next »