Author Topic: had some fun today  (Read 7268 times)

Offline screamin86

  • Junior Member
  • ***
  • Posts: 661
had some fun today
« on: March 25, 2011, 12:44:11 pm »
well fridays the the day i take the trash to the dump and one of the only couple days a week i drive the truck. so after i took the trash i decided to let the truck stretch its legs a little and see how the carb adjustments and timming adjustments i made helpe in this cool air we had today. i went down a old country road and launched it off the the foot brake at 2400rpm and this was my results.



next time ill get a camera man and make some videos :)
86 k10 lwb 4x4:350 .040 214/224 444/466 112lsa performer rpm 1406 lt's summit racing th350 2800stall
03 yukon xl:tint debadge full boltons
86 ta:lm7 hot cam boltons

Offline jaredts

  • Senior Member
  • ****
  • Posts: 1330
Re: had some fun today
« Reply #1 on: March 25, 2011, 01:42:10 pm »
Makes you feel like a kid again, doesn't it?!!  Do you have posi or are there two tracks because you feathered the parking brake?

Offline screamin86

  • Junior Member
  • ***
  • Posts: 661
Re: had some fun today
« Reply #2 on: March 25, 2011, 01:51:56 pm »
its a open rear but ive instances with alot of older gm stuff where it will lock in both after you have done a sharp left turn or backed up. that road on the right in the picture i had turned onto it and turned around to come back the way it spun and mabe doing that mae it lock in both but i took off from a stop sign after driving straight for a bit and it did the same just before this. i didnt power brake it though just brought it to the highest i could footbrake the 2800 converter without tires spinning then let out of the brake and floored it. ive never heard of putting the ebrake on. i was surprised it spun both really though lol. this truck helps keep me sane till my car is done lol.
86 k10 lwb 4x4:350 .040 214/224 444/466 112lsa performer rpm 1406 lt's summit racing th350 2800stall
03 yukon xl:tint debadge full boltons
86 ta:lm7 hot cam boltons

Offline 87454westernhauler

  • Frequent Member
  • **
  • Posts: 453
Re: had some fun today
« Reply #3 on: March 25, 2011, 02:34:34 pm »
I have an 87 1/2 ton manuel trans with a posi in it. Does burnouts sufficiently
86 c10 350 sbc 700R4 Daily Driver
79 gmc c20 350 th350
78 k1500 4x4 350 th350

Offline zieg85

  • Global Moderator
  • Senior Member
  • ****
  • Posts: 7595
    • 73-87 GM squarebody extended cab and conversions up to 91 R/V series
Re: had some fun today
« Reply #4 on: March 25, 2011, 03:03:33 pm »
Maybe my age or being frugal but it just looks like a waste of good rubber ;)
Carl 
1985 C20 Scottsdale 7.4L 4 speed 3.21
1986 C10 under construction
https://www.facebook.com/groups/248658382003506/

Offline screamin86

  • Junior Member
  • ***
  • Posts: 661
Re: had some fun today
« Reply #5 on: March 25, 2011, 03:40:15 pm »
Well I do agree but I didn't expect as much as it did and I only paid $40 for those tires about a year ago lol. I don't do this often either.
86 k10 lwb 4x4:350 .040 214/224 444/466 112lsa performer rpm 1406 lt's summit racing th350 2800stall
03 yukon xl:tint debadge full boltons
86 ta:lm7 hot cam boltons

Offline gto109

  • Frequent Member
  • **
  • Posts: 405
Re: had some fun today
« Reply #6 on: March 25, 2011, 08:50:48 pm »
i just did that last week with the wife's 86 T/A.  Just put a new(used) motor in it after sitting for 2 years dead.
67 Le Mans Convertible resto project 350 Pontiac w/powerglide,
85 Scottsdale k-10 305 700r4,
86 Trans Am 305 350th
06 Dodge Ram daily driver

Offline screamin86

  • Junior Member
  • ***
  • Posts: 661
Re: had some fun today
« Reply #7 on: March 25, 2011, 09:53:26 pm »
Nice! I plan to do that a few times in MY 86 T/A that's been sitting 3 years. Just finishing up my lsx swap now! :D
86 k10 lwb 4x4:350 .040 214/224 444/466 112lsa performer rpm 1406 lt's summit racing th350 2800stall
03 yukon xl:tint debadge full boltons
86 ta:lm7 hot cam boltons

Offline gto109

  • Frequent Member
  • **
  • Posts: 405
Re: had some fun today
« Reply #8 on: March 26, 2011, 09:50:18 am »
nice i would like to do that to our T/A but its already to much power for her to handle with a stock 305.
67 Le Mans Convertible resto project 350 Pontiac w/powerglide,
85 Scottsdale k-10 305 700r4,
86 Trans Am 305 350th
06 Dodge Ram daily driver

Offline screamin86

  • Junior Member
  • ***
  • Posts: 661
Re: had some fun today
« Reply #9 on: March 26, 2011, 04:12:48 pm »
Wow! Lol the stock 305 for mine the lg4 was 165hp lmao
86 k10 lwb 4x4:350 .040 214/224 444/466 112lsa performer rpm 1406 lt's summit racing th350 2800stall
03 yukon xl:tint debadge full boltons
86 ta:lm7 hot cam boltons

Offline gto109

  • Frequent Member
  • **
  • Posts: 405
Re: had some fun today
« Reply #10 on: March 26, 2011, 09:40:36 pm »
lol i know but she is used to a subaru 4 banger.  my truck has a 305 for now when it finally goes bad im going with a gmpp 350 thats 290 hp.  that should be plenty to pull a 4000 pound camper and 2  4wheelers on top of the diamandback cover.
« Last Edit: March 26, 2011, 09:46:06 pm by gto109 »
67 Le Mans Convertible resto project 350 Pontiac w/powerglide,
85 Scottsdale k-10 305 700r4,
86 Trans Am 305 350th
06 Dodge Ram daily driver

Offline slammed79

  • Senior Member
  • ****
  • Posts: 1367
  • Thou shalt not drive stock
Re: had some fun today
« Reply #11 on: March 26, 2011, 09:44:15 pm »
Glorious!
74 C10 Long bed 350/SM465 Lowered on 20's

Praise the lowered