Author Topic: Inline 6 with bigger tires  (Read 4078 times)

Offline Tanner

  • Newbie
  • Posts: 5
Inline 6 with bigger tires
« on: October 22, 2004, 06:09:00 pm »
I did post this question over on a different board here, got one response.  Thanks 79Apache.  Anyway, my 82 has the inline 6, I am riding on 205 75R15's right now.  I was thinking about going up to 225 75R15 snow tires for the winter.  A few people have told me that by increasing the size of the tire, I would be putting to much drag resistance on the little motor.  Can I get some more response on this.  I am mainly concerned because there is a big hill before you get to my place.


Offline Sano

  • Newbie
  • Posts: 71
Re: Inline 6 with bigger tires
« Reply #1 on: November 03, 2004, 11:09:00 am »
It shouldn't stress the motor at all, thats not a big increase in tire size so it should run normal. My friend has a 79' K10 with a 6" lift and 35x12.50's on his truck and that setup puts a little stress on the motor, but as for yours; there really shouldn't be any problems of stressing that inline.


Offline 1976Scottsdale

  • Junior Member
  • ***
  • Posts: 760
Re: Inline 6 with bigger tires
« Reply #2 on: November 03, 2004, 01:25:00 pm »
A friend of mine has a 71 jimmy with a 6in lift, 3.73 gears, a 250 l6, and 33" tires, he has no problems getting around, or climbing over trees for that matter.


Offline Redneckchevy

  • Junior Member
  • ***
  • Posts: 697
    • Photo Bucket
Re: Inline 6 with bigger tires
« Reply #3 on: November 20, 2004, 05:11:00 pm »
yea i had a v6 4 wheel drive  with 38 inch custom boggers ran fine

1986 Chevrolet K10 Swb "Women love the hood scoop"
1997 Chevrolet K10 Lwb "Dunno what women love"