Author Topic: Need help with Z BAR photo's  (Read 2387 times)

Offline bake74

  • Senior Member
  • ****
  • Posts: 5871
    • Build Thread
Need help with Z BAR photo's
« on: March 24, 2014, 09:31:46 PM »
      So I rebuilt my Z BAR on my 74 and I am missing the 2 springs that are attached.  I need pics of any from 73 to 84 with a manual non hydraulic clutch.  I am especially looking for the springs.  1 is from the Z BAR to the clutch fork.  The second is from the frame to the clutch fork. 
     If you need to see what I am talking about you can look in the 74 service manual in our tech section upper left of the page.
    Thanks in advance, and my wife will thank you since my truck is in the driveway loaded with dirt and is a eye sore.   ::)
     If anyone has measurements for these would help out a ton since I can not find out where to buy them, and they were not there when I took off the Z BAR.
« Last Edit: March 24, 2014, 09:33:57 PM by bake74 »
#1: The easiest and most obvious solution to any problem is 99% of the time correct.
#2: There is no such thing as impossible, it just takes longer.
  74 k10, 77k10    Tom

Offline Jason S

  • Senior Member
  • ****
  • Posts: 1561
Re: Need help with Z BAR photo's
« Reply #1 on: April 09, 2014, 12:26:46 AM »
Are you still needing the photos? If so, I can take some of my '74 K10 setup.
1973 GMC K2500, Super Custom, Camper Special, 350, TH350, NP203, 4.10's
1974 Chevrolet K10, Custom Deluxe, 350, SM465, NP203, 3.73's

"1) Peace through strength; 2) Trust but verify; 3) Beware of evil in the modern world"

Offline bake74

  • Senior Member
  • ****
  • Posts: 5871
    • Build Thread
Re: Need help with Z BAR photo's
« Reply #2 on: April 09, 2014, 07:43:42 AM »
     Actually I did a write up in the projects post, I ended up modifying it slightly to suit my desires.
#1: The easiest and most obvious solution to any problem is 99% of the time correct.
#2: There is no such thing as impossible, it just takes longer.
  74 k10, 77k10    Tom