« previous next »
Pages: [1]   Go Down

Author Topic: 6.2 a/c wiring question  (Read 1618 times)

Offline brownjimmy83

  • Newbie
  • Posts: 18
  • Newbie
6.2 a/c wiring question
« on: June 01, 2014, 07:20:50 PM »
The guy i bought my 83 crew cab off of cut all of the air conditioning wiring and parts off the truck under the hood. When i swapped in the 400 sbc i rebuilt in i used a serpentine setup so i am now running a different compressor and if all goes well i will have money for all the new parts next week. What i am needing to know is where the wires for a/c compressor clutch and high and low pressure switches came put of harness at.
Pictures and wire colors would be nice if anyone could help me out i would appreciate it.
Logged

Offline bake74

  • Senior Member
  • ****
  • Posts: 5871
    • Build Thread
Re: 6.2 a/c wiring question
« Reply #1 on: June 01, 2014, 10:42:01 PM »
     See the complete wiring diagrams for our trucks in the tech section. 
     I am not quite sure if this will help, it does not list the diesel engine, only the v8 and I6, but I am not the expert to know if they are the same.  It is a starting point for you though.
Logged
#1: The easiest and most obvious solution to any problem is 99% of the time correct.
#2: There is no such thing as impossible, it just takes longer.
  74 k10, 77k10    Tom

Offline brownjimmy83

  • Newbie
  • Posts: 18
  • Newbie
Re: 6.2 a/c wiring question
« Reply #2 on: June 02, 2014, 01:48:09 AM »
Thank you bake74 ill check it out. Always nice going back and fixing others hack jobs
Logged
Pages: [1]   Go Up
« previous next »