« previous next »
Pages: [1]   Go Down

Author Topic: what causes this....  (Read 3392 times)

Offline Cam68

  • Newbie
  • Posts: 21
  • Newbie
what causes this....
« on: July 08, 2014, 11:22:56 pm »
Question reguarding truck bed/stance....ive seen many 73-87 trucks from behind that seem to sit what id describe as unevenly, that is, the bed seems to sit way lower on 1 side then the other, almost as if the frame would be twisted. Not to sound stupid but...what could cause this?? is this a suspension issue/ bad spring on 1 side/ bad cab mounts/ possible twisted frame??
Logged

Offline Irish_Alley

  • Tim
  • Senior Member
  • ****
  • Posts: 13333
  • Family is not an important thing. It's everything.
Re: what causes this....
« Reply #1 on: July 08, 2014, 11:50:33 pm »
could be spring fatigue, some alignment shops will take note on how big the driver is just so they accommodate the extra weight. i have heard of some leaving the passengers door open but its the same deal with springs over time if one side sees more weight ie big driver or fuel tank then that side will tend to sag more than the other. or just something is bent
Logged
If you can’t tell yourself the truth, who can you tell it to?~Irish_Alley

When you have eliminated the impossible, whatever remains, however improbable, must be the truth ~Sherlock Holmes

Offline bake74

  • Senior Member
  • ****
  • Posts: 5871
    • Build Thread
Re: what causes this....
« Reply #2 on: July 09, 2014, 09:49:49 pm »
Quote from: Cam68 on July 08, 2014, 11:22:56 pm
Question reguarding truck bed/stance....ive seen many 73-87 trucks from behind that seem to sit what id describe as unevenly, that is, the bed seems to sit way lower on 1 side then the other, almost as if the frame would be twisted. Not to sound stupid but...what could cause this?? is this a suspension issue/ bad spring on 1 side/ bad cab mounts/ possible twisted frame??

     Any of these could be the answer, until you get in there and start measuring and seeing what is off it's only guessing.
Logged
#1: The easiest and most obvious solution to any problem is 99% of the time correct.
#2: There is no such thing as impossible, it just takes longer.
  74 k10, 77k10    Tom

Offline Engineer

  • Senior Member
  • ****
  • Posts: 1402
Re: what causes this....
« Reply #3 on: July 10, 2014, 08:40:46 am »
Mine was a sagged rear spring.
Logged
2002 Chevy 2500HD 4x4 8.1/ZF6sp RC/LB
2001 Chevy 2500HD 4x4 6.0/4L85E EC/SB
1997 Chevy Blazer 4x4
1994 Chevy K-2500 4x4 C6P 5.7/4L80E
1979 Chevy K-30 4x4 4sp 4.10
1977 Chevy K-30 4x4 4sp 4.10 454

Dad of an Eagle Scout, and a Life Scout

Offline 81GMCBILL

  • Newbie
  • Posts: 55
Re: what causes this....
« Reply #4 on: July 19, 2014, 01:25:49 am »
My experience are that sometimes one side of the cab bushing is bad -and that the bed is actually level.
Logged
85 GMC K25 4X4 383/th400/np208
Pages: [1]   Go Up
« previous next »