« previous next »
Pages: [1]   Go Down

Author Topic: Performance questions  (Read 3551 times)

Offline 454c10

  • Newbie
  • Posts: 50
  • Newbie
Performance questions
« on: June 01, 2015, 01:33:44 pm »
Ok so does 454s have hydraulic or mechanical cams stock also would it b too much to put a 750 double pump its got 650 now an intake and headers now i want a cam.im looking in the 550 lift area 
Logged

Offline LTZ C20

  • Senior Member
  • ****
  • Posts: 3795
  • "I'm here for a good time" -George Strait
Re: Performance questions
« Reply #1 on: June 01, 2015, 02:02:43 pm »
Usually hydraulic or mechanical refers to the type of lifter. They are hydraulic from the factory.
Logged
LTZ Cheyenne C20

Offline rich weyand

  • Senior Member
  • ****
  • Posts: 1391
Re: Performance questions
« Reply #2 on: June 02, 2015, 01:58:50 am »
The maximum theoretical air a normally aspirated (no supercharger, turnocharger, or nitrous) 454 can pump at 5000 rpm is 650 cfm.  In practice it will be less than that.  So I think it is probably optimally carbureted at the moment.
Logged
Rich

"Working Girl": 1978 K-10 RCSB 350/TH350/NP203 +2/+3 Tuff Country lift

Offline Irish_Alley

  • Tim
  • Senior Member
  • ****
  • Posts: 13333
  • Family is not an important thing. It's everything.
Re: Performance questions
« Reply #3 on: June 03, 2015, 08:11:22 am »
Quote from: rich weyand on June 02, 2015, 01:58:50 am
The maximum theoretical air a normally aspirated (no supercharger, turnocharger, or nitrous) 454 can pump at 5000 rpm is 650 cfm.  In practice it will be less than that.  So I think it is probably optimally carbureted at the moment.
x2
Logged
If you can’t tell yourself the truth, who can you tell it to?~Irish_Alley

When you have eliminated the impossible, whatever remains, however improbable, must be the truth ~Sherlock Holmes
Pages: [1]   Go Up
« previous next »