« previous next »
Pages: [1]   Go Down

Author Topic: Adding a factory clock.  (Read 3755 times)

Offline Tommyd11730

  • Newbie
  • Posts: 84
  • Newbie
Adding a factory clock.
« on: December 28, 2016, 10:59:57 pm »
Ok, so I'm thinking of adding a factory quartz clock to my 84 GMC K2500.  Did the clocks have a patch harness (12v?) to power them up (like the tach?).  I figure I have to drill the clear lens, but can anyone think of anything else I have to do?

Thanks!
Logged
1991 K5
1984 K2500

Offline zieg85

  • Global Moderator
  • Senior Member
  • ****
  • Posts: 7595
    • 73-87 GM squarebody extended cab and conversions up to 91 R/V series
Re: Adding a factory clock.
« Reply #1 on: December 29, 2016, 09:55:09 am »
Piece of cake, I did it once about 10 years ago so I don't know the specifics other than the wiring plug uses the cab ground above the parking brake and the positive goes right to the fuse block.
Logged
Carl 
1985 C20 Scottsdale 7.4L 4 speed 3.21
1986 C10 under construction
https://www.facebook.com/groups/248658382003506/

Offline Tommyd11730

  • Newbie
  • Posts: 84
  • Newbie
Re: Adding a factory clock.
« Reply #2 on: December 29, 2016, 11:14:41 am »
Roger that.  Now to find a clock!
Logged
1991 K5
1984 K2500

Offline Irish_Alley

  • Tim
  • Senior Member
  • ****
  • Posts: 13333
  • Family is not an important thing. It's everything.
Re: Adding a factory clock.
« Reply #3 on: December 29, 2016, 11:23:39 am »
Quote from: zieg85 on December 29, 2016, 09:55:09 am
Piece of cake, I did it once about 10 years ago so I don't know the specifics other than the wiring plug uses the cab ground above the parking brake and the positive goes right to the fuse block.
make sure its a constant power  ;)
Logged
If you can’t tell yourself the truth, who can you tell it to?~Irish_Alley

When you have eliminated the impossible, whatever remains, however improbable, must be the truth ~Sherlock Holmes
Pages: [1]   Go Up
« previous next »