« previous next »
Pages: [1]   Go Down

Author Topic: Loose connection by fuse panel  (Read 3011 times)

Offline jrbarrie83

  • Newbie
  • Posts: 70
Loose connection by fuse panel
« on: May 02, 2016, 09:04:34 pm »
Can anyone tell me what this connection might be for? Nothing on the truck that doesn't work as far as I can tell, so just assuming it's for an option I don't have or maybe an assembly line hookup. Orange, single wire connection, lime green wire that comes through the firewall. 83 Silverado K-10.
Logged

Offline Hutch998

  • Newbie
  • Posts: 31
  • Squarebody Obsession
Re: Loose connection by fuse panel
« Reply #1 on: May 03, 2016, 01:18:56 pm »
From my experience, the light green wire is for the back up light. It may differ from truck to truck, but I would have someone watch you put it in reverse.
Logged
78' K10
86' K20
94' K2500

Offline jrbarrie83

  • Newbie
  • Posts: 70
Re: Loose connection by fuse panel
« Reply #2 on: May 03, 2016, 02:07:57 pm »
Backup lights work, but thanks!
Logged

Online bd

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 6600
Re: Loose connection by fuse panel
« Reply #3 on: May 03, 2016, 03:26:20 pm »
Nothing plugs into that orange connector.  It is a test port for the TCC circuit on an MV4 (350C) automatic transmission. 
Logged
Rich
It's difficult to know just how much you don't know until you know it.
In other words... if people learn by making mistakes, by now I should know just about everything!!!
87 R10 Silverado Fleetside 355 MPFI 700R4 3.42 Locker (aka Rusty, aka Mater)

Offline jrbarrie83

  • Newbie
  • Posts: 70
Re: Loose connection by fuse panel
« Reply #4 on: May 03, 2016, 03:50:27 pm »
Thought it might be something like that. Thanks!
Logged
Pages: [1]   Go Up
« previous next »