Author Topic: My Build 4x4 k10  (Read 4004 times)

Offline BlakeMcAlavy

  • Newbie
  • Posts: 22
My Build 4x4 k10
« on: December 17, 2006, 07:15:00 pm »
Full Restoration.
Here some Parts
Sbc 350 Block .030 over
SRP Forged Pistons
Eagle 383 Rotating Assebly
Dart Pro 1 Heads, 215cc 2.05 Intake, 1.60 exhaust
Pro Comp Valves
Edelbrock Airgap RPM Edurashine
Speed Demon 750
Harland Sharp Roller Rockers
Comp Cam .515 Lift
Hooker Super Comp Headers Cermic
Ball Milled Dress ups
MSD pro billet hei
MSD plugs
Chrome Master Cylinder
Vintage Air W/ Servo Motors
Summit Fuel Pump
March Surpintine System
Finned Oil pan, Differential Cover, Tranny pan, Dust cover.
Rancho Dual Steering Stabilizer
4.11 Gears
Th400
Jegs 2200 Stall Coverter
SFI Flex Plate
Jegs Chrome Mini Lite Starter
All New Body Work
Dakota Digital Guages
Optima Battery


Offline joesgarage71

  • Wrench
  • Senior Member
  • ****
  • Posts: 1156
Re: My Build 4x4 k10
« Reply #1 on: December 18, 2006, 06:48:00 pm »
Sounds good, Have any pics?
Steve

78' K-20 355/SM465/twin stick 205 6" on 36's
14 bolt FF/big bearing Dana 44 4.56 gears

92' GMC C-1500 454/4L80E/14 bolt

Offline BlakeMcAlavy

  • Newbie
  • Posts: 22
pictures
« Reply #2 on: December 19, 2006, 08:10:00 pm »
I dont know how to post them. how do I do it.


Offline Lt.Del

  • Andy aka:SgtDel
  • Senior Member
  • ****
  • Posts: 3864
  • DelbridgePhotography.com
    • www.delbridge.net
Re: pictures
« Reply #3 on: December 19, 2006, 10:58:00 pm »
Check this out






p210.ezboard.com/f7387chevytrucks88686frm8.showMessage?topicID=506.topic

SgtDel
aka "Andy"

www.delbridge.net

1979 Big 10 383 stroker
1991 Blu 'Burb 3/4 ton 4x4

Edited by: SgtDel  at: 12/19/06 11:02 pm