Author Topic: NV-4500 into a 76 C-30  (Read 1137 times)


  • New Users
  • Posts: 2
NV-4500 into a 76 C-30
« on: July 20, 2008, 11:05:09 AM »
First off hi to everyone , well here are a few questions for any one who might be able to answer them.I have a 1 ton with a 350 and a granny gear transmission bolted up to a 14 bolt rear end .What im planning on doing is putting in a NV-4500 , 95 and up model cause of the 5.61:1 ratio as opposed to the 92 to 94 model with the 6.34:1 ratio,i dont want or need the low gear . And im looking to find out if it will bolt up to a gen 1 350 without an adaptor kit , i know ill need to modify the drive shaft and maybe the yoke ,,but any help would be greatly helpfull. thank you  :o

Offline cracker0169

  • Registered Users
  • *
  • Posts: 150
    • Myspace
1981 K10, 350 - SM465 - NP205 sittin' on 37's
1983 C10, 305HO - TH400