« previous next »
Pages: [1]   Go Down

Author Topic: 86 gmc pickup 4x4  (Read 4339 times)

Offline johnnyb

  • New Users
  • Posts: 1
86 gmc pickup 4x4
« on: January 02, 2009, 07:25:43 pm »
Hi
was looking for any info on installing a tach on the steering column and help or advise would be of great help the column is non tilt thanks.
Logged

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19213
Re: 86 gmc pickup 4x4
« Reply #1 on: January 02, 2009, 07:39:38 pm »
It's just clamped on around the column. However it looks cheesy there. Mount it on the dash or somewhere stealth
Logged
,                           ___ 
                         /  _ _ _\_
              ⌠ŻŻŻŻŻ'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10

Offline oldwhity

  • Senior Member
  • ****
  • Posts: 1037
Re: 86 gmc pickup 4x4
« Reply #2 on: January 02, 2009, 08:21:00 pm »
Most people have it on the column. Some will mount it to the windshield pillar.
Logged
Rob G.
81 Chevy K20 4x4 LWB stepside
I enjoy long quiet walks..........in a junkyard!

Offline Hook

  • Newbie
  • Posts: 13
Re: 86 gmc pickup 4x4
« Reply #3 on: January 03, 2009, 11:46:17 am »
I used hose clamps to mount my tach on the column.
Wiring for the tach would be
Red - 12V keyed power
White - to light switch power (I run Red and White together to same Keyed power)
Green -  Neg on coil or "Tach" connector on HEI
Black - Ground
Logged
78 Suburban 2500 454/th400- SOLD!!!!!!!
Looking for a new 73-87 Chevy
70 Camaro 350/th400
89 Mustang 5.0/AOD
Pages: [1]   Go Up
« previous next »