Author Topic: Identifying an engine...  (Read 4137 times)

Offline Dirtydog

  • Newbie
  • Posts: 52
Identifying an engine...
« on: April 28, 2009, 05:15:40 pm »
I have this block that I really am not sure what it is. The number is GM 3834810 But GM put that number on three different engines.

3970010....302.....69....4...Z-28 Camaro
3970010....327.....69....2...Trucks and industrial
3970010....350...69-80...2 or 4

It is a 2 Bolt main. And no I don't know what it came out off. Any other way to tell?

Thanks!

-Josh

Offline Blue 82

  • Frequent Member
  • **
  • Posts: 281
Re: Identifying an engine...
« Reply #1 on: April 28, 2009, 05:33:46 pm »
1964 to 1966 283
82 stepside 2wd 355/th350/3.08 posi

Offline Captkaos

  • OWNER and Administrator
  • Administrator
  • Senior Member
  • *****
  • Posts: 18454
    • http://www.73-87chevytrucks.com
Re: Identifying an engine...
« Reply #2 on: April 28, 2009, 06:03:16 pm »
The numbers you lists that the 3 are the same aren't the same as the number you listed at the top, which is as Blue 82 stated a 64-66 283.

Offline oldwhity

  • Senior Member
  • ****
  • Posts: 1037
Re: Identifying an engine...
« Reply #3 on: April 28, 2009, 07:50:40 pm »
It is a 2 Bolt main. And no I don't know what it came out off.




Check  the front of the block. Sometimes there's an engine boss on the front of the block below the passenger side head. It would be a stamping with a prefix or suffix letters or both.
Rob G.
81 Chevy K20 4x4 LWB stepside
I enjoy long quiet walks..........in a junkyard!

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19171
Re: Identifying an engine...
« Reply #4 on: April 28, 2009, 08:05:11 pm »
Sounds like a 283 to me also
,                           ___ 
                         /  _ _ _\_
              ⌠ŻŻŻŻŻ'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10

Offline Dirtydog

  • Newbie
  • Posts: 52
Re: Identifying an engine...
« Reply #5 on: April 29, 2009, 08:59:11 pm »
Thanks guys!

-Josh