« previous next »
Pages: [1]   Go Down

Author Topic: Tall-deck 427's  (Read 5613 times)

Offline SUX2BU99

  • Senior Member
  • ****
  • Posts: 1478
    • My Cardomain Site. Truck is on Page 6.
Tall-deck 427's
« on: September 17, 2009, 04:59:33 pm »
Are there reasons why this is NOT a candidate for a performance motor vs. a regular 427 BBC?  These tall-decks came in things like 5-tons, Top Kicks and such, right? I remember renting a 25' U-Haul once and it was a Top Kick that had a big block and a 4 speed in it. Dunno if it was a 427 or not.

I just love the engine size 427 and these tall-decks aren't that expensive or too hard to find :)  Just curious really.
Logged
85 Chevy Silverado C10 short, wide, yellow, 2wd. Lowered, 60-over 350 with Dart Iron Eagle heads and Comp Cams XE268 cam, TH350 w/ shift kit, 3.40 Gov-lok 12 bolt.

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19213
Re: Tall-deck 427's
« Reply #1 on: September 17, 2009, 06:49:22 pm »
Tall decks can be a pita more than their worth. You can build almost a 500 out of one but there are lots of differences that can lead to oversight. Otherwise if you can get a complete cheap one go for it.
Logged
,                           ___ 
                         /  _ _ _\_
              ⌠ŻŻŻŻŻ'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10

Offline joesgarage71

  • Wrench
  • Senior Member
  • ****
  • Posts: 1156
Re: Tall-deck 427's
« Reply #2 on: September 17, 2009, 08:09:26 pm »
 A guy I knew ran a dirt car 427 tall deck, made lots of horsepower with one. He used spacers on the intake so he can run the 4500 holley single plane intake. Nothing wrong with building a tall deck, parts are plentfull.
Logged
78' K-20 355/SM465/twin stick 205 6" on 36's
14 bolt FF/big bearing Dana 44 4.56 gears
92' GMC C-1500 454/4L80E/14 bolt

Offline cubicdollars

  • Frequent Member
  • **
  • Posts: 345
Re: Tall-deck 427's
« Reply #3 on: September 19, 2009, 01:08:59 am »
I am in the process of building a tall deck for my stepside. I feel really good about the combo. take a look at the link I have gotten pretty detailed.


http://forum.73-87chevytrucks.com/smforum/index.php?topic=10481.0

Thanks
Dan
« Last Edit: September 21, 2009, 06:18:52 pm by Captkaos »
Logged
1977 Stepside,F2 Procharged BBC 505
1984 Buick T Type Regal, LS Swapped

Offline aussie

  • Registered Users
  • *
  • Posts: 108
Re: Tall-deck 427's
« Reply #4 on: October 02, 2009, 06:23:55 pm »
wasnt there a 366 big block td  too !! i thought those were common in the 70-80s
Logged

Offline joesgarage71

  • Wrench
  • Senior Member
  • ****
  • Posts: 1156
Re: Tall-deck 427's
« Reply #5 on: October 03, 2009, 09:07:04 am »
Quote from: aussie on October 02, 2009, 06:23:55 pm
wasnt there a 366 big block td  too !! i thought those were common in the 70-80s

Yes they were
Logged
78' K-20 355/SM465/twin stick 205 6" on 36's
14 bolt FF/big bearing Dana 44 4.56 gears
92' GMC C-1500 454/4L80E/14 bolt
Pages: [1]   Go Up
« previous next »