« previous next »
Pages: [1]   Go Down

Author Topic: request for pic with 325 tire.  (Read 3378 times)

Offline proslow

  • Newbie
  • Posts: 4
request for pic with 325 tire.
« on: August 15, 2010, 10:29:06 am »
im sure there are a couple race trucks out there.

what im looking for a  a pic of  a lowered truck with a 325 under it. prefer with stock length rearend.

currently im cutting the wheel tubs and  extending them all the way to the frame.  and  im trying to figure if a 325 will fit without  cutting rearend down.  and  fliping the  leaf spring to the inside.  i searched for it and only found one truck with a 325 under it.  but it didnt ahve a bed. all the other trucks were stock height. and tire looked to stick out a little.
Logged

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19180
Re: request for pic with 325 tire.
« Reply #1 on: August 15, 2010, 02:36:14 pm »
Logged
,                           ___ 
                         /  _ _ _\_
              ⌠ŻŻŻŻŻ'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10

Offline HAULIN IT

  • Senior Member
  • ****
  • Posts: 1542
Re: request for pic with 325 tire.
« Reply #2 on: August 15, 2010, 10:37:52 pm »
Here ya' go...325/50 on a stock rear. The tubs were just widened back to the springs & they don't need moved.

 I have since changed to a 9", I made the total track width 2" narrower using the same tires to get the sidewall off of the inner bedsides a bit. Lorne
 
Logged
Pages: [1]   Go Up
« previous next »