« previous next »
Pages: [1]   Go Down

Author Topic: 350 machine cost  (Read 2741 times)

Offline 305chevy c-10

  • Frequent Member
  • **
  • Posts: 292
350 machine cost
« on: January 10, 2011, 05:25:23 pm »
hi can anybody give me a reasonable cost to fully machine a block ...so i know if im over charged ...........lets say .040 over and check and crank
Logged
Heartbeat of America yesterday's cheverolet
18T5C10

Offline screamin86

  • Junior Member
  • ***
  • Posts: 661
Re: 350 machine cost
« Reply #1 on: January 10, 2011, 06:57:27 pm »
The last one I had done he charged me like $13.50 or 13.75 a hole to bore and hone.
Logged
86 k10 lwb 4x4:350 .040 214/224 444/466 112lsa performer rpm 1406 lt's summit racing th350 2800stall
03 yukon xl:tint debadge full boltons
86 ta:lm7 hot cam boltons

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19170
Re: 350 machine cost
« Reply #2 on: January 10, 2011, 07:07:29 pm »
Bore and hone 8 holes is usually about $180 bucks. Don't forget hot tank, align hone, decking, etc is more. If you don't have a cam bearing tool you're looking at about $40-60 bucks for that and core plugs. Hanging pistons on rods is usually about $10 bucks a rod so $80 bucks.
Logged
,                           ___ 
                         /  _ _ _\_
              ⌠ŻŻŻŻŻ'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10

Offline Jim Rockford

  • Banned
  • Frequent Member
  • **
  • Posts: 358
Re: 350 machine cost
« Reply #3 on: January 12, 2011, 08:03:37 am »
It varies by local. You need to call around and get prices. Cost here in VA would be different than your area.
Logged
1973 k20 Camper special
1980 k20 custom deluxe
2004 Crown Vic LX sport
Pages: [1]   Go Up
« previous next »