« previous next »
Pages: [1]   Go Down

Author Topic: tbi in 86 dual tank issues.  (Read 2217 times)

Offline pro94lt

  • New Users
  • Posts: 1
tbi in 86 dual tank issues.
« on: January 15, 2011, 06:25:27 pm »
I've got a 86 4x4 that I put a tbi 350 out of a 87 in, I never installed the speed sensor and I'm trying to get it all hooked up write. I also only have one tank since I could'nt figure out how to get a return line for the tank I was using. I still do have the 87 and I'm fixing to pull it out of the woods, pull the tanks and see if I can use the valve and all the lines out of it. I've got a inline pump on it now and i just don't like the sound it makes. Anyone know how I can get a speed sensor to hook up to a 86 model 700r4. This truck has been sitting for a couple years and it's time to get it back on the road. Anyone know if the wiring harness for the fuel pumps to the tanks is easy or hard to get out?
Logged

Offline bake74

  • Senior Member
  • ****
  • Posts: 5871
    • Build Thread
Re: tbi in 86 dual tank issues.
« Reply #1 on: January 16, 2011, 04:54:50 pm »
     Welcome to the site, I don't have the answer's to your questions, but be patient, someone will answer shortly I am sure.
Logged
#1: The easiest and most obvious solution to any problem is 99% of the time correct.
#2: There is no such thing as impossible, it just takes longer.
  74 k10, 77k10    Tom

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19192
Re: tbi in 86 dual tank issues.
« Reply #2 on: January 16, 2011, 06:00:18 pm »
I'm not quite sure what you're asking.
Logged
,                           ___ 
                         /  _ _ _\_
              ⌠ŻŻŻŻŻ'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10
Pages: [1]   Go Up
« previous next »