« previous next »
Pages: [1]   Go Down

Author Topic: fixing my bed  (Read 3166 times)

Offline bowtieman82

  • Newbie
  • Posts: 58
fixing my bed
« on: February 15, 2011, 11:20:43 am »
my truck is a 82 chevy, fleet side bed.  my bed on the right side needs replaced and i cant weld to mount it. i know there a bounding glue that you can use, i dont know the name of it or were to get it.  can any one help. i would post a pic my truck but i cant post a pic on here yet tell me how
Logged

Online VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19182
Re: fixing my bed
« Reply #1 on: February 15, 2011, 11:26:08 am »
If you are replacing the whole bedside you need to cut the weld near the tailgate and that is the only place it is welded. You can rent a welder or have someone local put a bead on it. It will cost you more for panel pond adhesive and that isn't what its intended for.
Logged
,                           ___ 
                         /  _ _ _\_
              ⌠ŻŻŻŻŻ'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10

Offline bowtieman82

  • Newbie
  • Posts: 58
Re: fixing my bed
« Reply #2 on: February 15, 2011, 12:26:04 pm »
then why do i have spot weld on the top of the bed. along the the bed rails.
Logged

Online VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19182
Re: fixing my bed
« Reply #3 on: February 15, 2011, 12:29:57 pm »
Because thats how the skins are formed and welded together. A bedside is an entire assembly. Are you trying to just replace the skin?
Logged
,                           ___ 
                         /  _ _ _\_
              ⌠ŻŻŻŻŻ'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10

Offline jaredts

  • Senior Member
  • ****
  • Posts: 1330
Re: fixing my bed
« Reply #4 on: February 15, 2011, 12:47:36 pm »
I think you could put one of these on with PanelBond or similar:  http://store.73-87chevytrucks.com/merchant2/merchant.mvc?Screen=PROD&Store_Code=7&Product_Code=0850-125A-126A&Category_Code=7387Beds
Describe the damage and how much needs replaced.  Have you looked at this for posting pics: http://forum.73-87chevytrucks.com/smforum/index.php?topic=6428.0
Logged

Offline bowtieman82

  • Newbie
  • Posts: 58
Re: fixing my bed
« Reply #5 on: February 15, 2011, 01:38:26 pm »
i am replacing the hole bed side in one peace the hole the thing is no good, got hit and rust. yes its the skin didnt know it was called that sorry
« Last Edit: February 15, 2011, 01:52:27 pm by bowtieman82 »
Logged

Offline bowtieman82

  • Newbie
  • Posts: 58
Re: fixing my bed
« Reply #6 on: February 15, 2011, 02:49:50 pm »
i have found something called norton automotive Adhesives something called speedgrip structural adhesives do u know where to get it.
Logged

Online VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19182
Re: fixing my bed
« Reply #7 on: February 15, 2011, 03:27:28 pm »
Quote from: bowtieman82 on February 15, 2011, 01:38:26 pm
i am replacing the hole bed side in one peace the hole the thing is no good, got hit and rust. yes its the skin didnt know it was called that sorry

Here you are contradicting yourself so you'll need to clarify what you are doing.  You are saying you are replacing the whole side then you are saying just the skin. The skin is just the outer layer. The bed side is the entire side section of the bed. So which are you doing?
Logged
,                           ___ 
                         /  _ _ _\_
              ⌠ŻŻŻŻŻ'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10
Pages: [1]   Go Up
« previous next »