Author Topic: Need help identifying truck.  (Read 9608 times)

Offline zslates

  • Newbie
  • Posts: 13
Need help identifying truck.
« on: March 03, 2011, 08:42:23 pm »
I'm trying to id my 77 truck.  I was thinking it was a heavy half but not sure now. I'm also thinking that it doesn't have smog equip because it's over 6000. Thought?

- k10
- 6200 gvwr
- no f44 option
- 6 leafs in rear
- 4th digit in vin is 1
- no smog equipment and it doesn't look as though it ever had any.
- it's a ca truck out of freemont.
- vin Ckl147z126356
- Gawr front/rear 3520

Offline zieg85

  • Global Moderator
  • Senior Member
  • ****
  • Posts: 7595
    • 73-87 GM squarebody extended cab and conversions up to 91 R/V series
Re: Need help identifying truck.
« Reply #1 on: March 03, 2011, 09:05:42 pm »
If the 4th digit would have been a 4, it would have been a heavy half but being a 1 it is just considered a 1/2 ton

http://www.73-87chevytrucks.com/VIN.htm
Carl 
1985 C20 Scottsdale 7.4L 4 speed 3.21
1986 C10 under construction
https://www.facebook.com/groups/248658382003506/

Offline zslates

  • Newbie
  • Posts: 13
Re: Need help identifying truck.
« Reply #2 on: March 03, 2011, 09:21:01 pm »
door plare


Offline txchainsawgogi

  • Junior Member
  • ***
  • Posts: 584
Re: Need help identifying truck.
« Reply #3 on: March 03, 2011, 09:42:20 pm »
i just learned i have a heavy half  8)

Offline slammed79

  • Senior Member
  • ****
  • Posts: 1367
  • Thou shalt not drive stock
Re: Need help identifying truck.
« Reply #4 on: March 03, 2011, 09:46:20 pm »
Its supposed to have cats on it, maybe an egr. It should at the very least have a charcoal cannister on it. Is Paradise in Tehema county? I really can't remember if they are a no smog county or not.
74 C10 Long bed 350/SM465 Lowered on 20's

Praise the lowered

Offline zieg85

  • Global Moderator
  • Senior Member
  • ****
  • Posts: 7595
    • 73-87 GM squarebody extended cab and conversions up to 91 R/V series
Re: Need help identifying truck.
« Reply #5 on: March 03, 2011, 09:50:32 pm »
Its supposed to have cats on it, maybe an egr. It should at the very least have a charcoal cannister on it. Is Paradise in Tehema county? I really can't remember if they are a no smog county or not.

If it is the gvwr rating you may have been high enough for no cats.  Does the fuel gauge mention unleaded fuel only?  I had a 1978 F150 that didn't have cats. 
Carl 
1985 C20 Scottsdale 7.4L 4 speed 3.21
1986 C10 under construction
https://www.facebook.com/groups/248658382003506/

Offline zslates

  • Newbie
  • Posts: 13
Re: Need help identifying truck.
« Reply #6 on: March 03, 2011, 11:04:21 pm »
I don't believe I've seen the unleaded fuel only sticker, but will have to check

Offline bake74

  • Senior Member
  • ****
  • Posts: 5871
    • Build Thread
Re: Need help identifying truck.
« Reply #7 on: March 05, 2011, 09:32:46 am »
     c=chevy, k=4x4, L=350 v8 4 barrel, 1=1/2 ton, 4=cab +pickup box, 7= 1977, z= assembly plant (Fort Wayne, Indiana/ Fremont, California/ or Spring Hill, Tennessee, unfortually it doestn't tell you which one), 126356= serial number.  If it was made in the Fremont plant for California it should have had smog epuipment on it, more than likely it was made at one of the other plants and brought to California.
#1: The easiest and most obvious solution to any problem is 99% of the time correct.
#2: There is no such thing as impossible, it just takes longer.
  74 k10, 77k10    Tom

Offline zieg85

  • Global Moderator
  • Senior Member
  • ****
  • Posts: 7595
    • 73-87 GM squarebody extended cab and conversions up to 91 R/V series
Re: Need help identifying truck.
« Reply #8 on: March 05, 2011, 09:50:16 am »
     c=chevy, k=4x4, L=350 v8 4 barrel, 1=1/2 ton, 4=cab +pickup box, 7= 1977, z= assembly plant (Fort Wayne, Indiana/ Fremont, California/ or Spring Hill, Tennessee, unfortually it doestn't tell you which one), 126356= serial number.  If it was made in the Fremont plant for California it should have had smog epuipment on it, more than likely it was made at one of the other plants and brought to California.

In my link Z is Fremont for the plant.
Carl 
1985 C20 Scottsdale 7.4L 4 speed 3.21
1986 C10 under construction
https://www.facebook.com/groups/248658382003506/

Offline zslates

  • Newbie
  • Posts: 13
Re: Need help identifying truck.
« Reply #9 on: March 05, 2011, 11:39:26 am »
There's no unleaded fuel only sign on the fuel gauge, it just says fuel. 

Since its 6200 GVWR it must have not had the smog equipment (even thought its a CA truck) and it's not a Big 10 (F44) option.... so maybe all k10's around this year we're over 6000 GVWR.

Anyone else have a k10 CA truck around this year that's under 6000 gvwr?

Zack


Offline 1979C20

  • Senior Member
  • ****
  • Posts: 1659
  • Kyle Taulton.
Re: Need help identifying truck.
« Reply #10 on: March 20, 2011, 07:30:39 pm »
My 79 c20 is 11,000 gcw from cali and it came LOADED wiyh smog equipment.
1979 SCLB C20 Q-jet 350 SM465 14b F.F. 4.10 G80
1989 GMC Suburban V2500 TBI350 TH400 4in lift 35's 14b SF