« previous next »
Pages: [1]   Go Down

Author Topic: Rear brake problem need help!  (Read 4220 times)

Offline tbarrii

  • Newbie
  • Posts: 32
Rear brake problem need help!
« on: May 08, 2011, 08:50:14 am »
My 85 silverado does not have rear brakes.  i removed the line for the rears at the master and got very little, so i replaced the master.  the new one now has the same problem!  what do i check next. 
Logged
85 Chevy Silverado 1/2 ton 4x4 355ci

Offline Irish_Alley

  • Tim
  • Senior Member
  • ****
  • Posts: 13333
  • Family is not an important thing. It's everything.
Re: Rear brake problem need help!
« Reply #1 on: May 08, 2011, 09:10:58 am »
Proportioning valve. did you remove the line before or after the rubber line that goes to the rear
Logged
If you can’t tell yourself the truth, who can you tell it to?~Irish_Alley

When you have eliminated the impossible, whatever remains, however improbable, must be the truth ~Sherlock Holmes

Offline tbarrii

  • Newbie
  • Posts: 32
Re: Rear brake problem need help!
« Reply #2 on: May 08, 2011, 10:08:36 am »
i took the line off at the master and after the rubber at the rear end, nothing in between.
Logged
85 Chevy Silverado 1/2 ton 4x4 355ci

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19184
Re: Rear brake problem need help!
« Reply #3 on: May 08, 2011, 11:00:22 am »
Please clarify. Are you saying you have no hydraulic pressure directly out of the master cylinder for the rear channel? If so did you bench bleed the master cylinder prior to installation? Are you using clean new DOT 3 brake fluid? 
Logged
,                           ___ 
                         /  _ _ _\_
              ⌠¯¯¯¯¯'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10

Offline tbarrii

  • Newbie
  • Posts: 32
Re: Rear brake problem need help!
« Reply #4 on: May 08, 2011, 11:54:11 am »
i have no pressure out of the master to the rear at all.  i did not bench bleed the new master.  what does that entail as i have not done that before.
Logged
85 Chevy Silverado 1/2 ton 4x4 355ci

Offline topp

  • Frequent Member
  • **
  • Posts: 498
Re: Rear brake problem need help!
« Reply #5 on: May 08, 2011, 12:13:39 pm »
Quote from: tbarrii on May 08, 2011, 11:54:11 am
i have no pressure out of the master to the rear at all.  i did not bench bleed the new master.  what does that entail as i have not done that before.

That's your problem right there.
The new master should have come with directions to bench bleed....
Logged
'90 Suburban TBI 350

Offline jt1200r

  • Newbie
  • Posts: 29
Re: Rear brake problem need help!
« Reply #6 on: May 17, 2011, 10:38:43 am »
it could be the rubber hose. the inside deteriorates and clogs up
Logged
87 R10 4.3
Pages: [1]   Go Up
« previous next »