Author Topic: brake lites  (Read 3690 times)

Offline jt1200r

  • Newbie
  • Posts: 29
brake lites
« on: July 16, 2011, 01:15:46 pm »
my rear brake,signal and hazard lites dont work. the running and backup lites work. the front and dash signal lites work. any ideas what it could be ? its a 87 r10 step side .Thanks
87 R10 4.3

Offline 1979C20

  • Senior Member
  • ****
  • Posts: 1659
  • Kyle Taulton.
Re: brake lites
« Reply #1 on: July 16, 2011, 01:41:03 pm »
Wiring under the bumper, and its "lights".
1979 SCLB C20 Q-jet 350 SM465 14b F.F. 4.10 G80
1989 GMC Suburban V2500 TBI350 TH400 4in lift 35's 14b SF

Offline jt1200r

  • Newbie
  • Posts: 29
Re: brake lites
« Reply #2 on: July 16, 2011, 03:43:56 pm »
i dont have a rear bumper. my tag lites dont work either
87 R10 4.3

Offline 1979C20

  • Senior Member
  • ****
  • Posts: 1659
  • Kyle Taulton.
Re: brake lites
« Reply #3 on: July 16, 2011, 05:24:33 pm »
Under where the bumper bolts to the frame. Like, under the bed at the very end of the truck.
1979 SCLB C20 Q-jet 350 SM465 14b F.F. 4.10 G80
1989 GMC Suburban V2500 TBI350 TH400 4in lift 35's 14b SF

Offline 1979C20

  • Senior Member
  • ****
  • Posts: 1659
  • Kyle Taulton.
Re: brake lites
« Reply #4 on: July 16, 2011, 05:25:14 pm »
Also, check brake light fuse.
1979 SCLB C20 Q-jet 350 SM465 14b F.F. 4.10 G80
1989 GMC Suburban V2500 TBI350 TH400 4in lift 35's 14b SF

Offline jt1200r

  • Newbie
  • Posts: 29
Re: brake lites
« Reply #5 on: July 16, 2011, 08:33:09 pm »
fuse is good. i checked the ground thats about the center of the bed in the rear
87 R10 4.3

Offline 1979C20

  • Senior Member
  • ****
  • Posts: 1659
  • Kyle Taulton.
Re: brake lites
« Reply #6 on: July 16, 2011, 10:28:10 pm »
Check the whole wiring harness under it.
1979 SCLB C20 Q-jet 350 SM465 14b F.F. 4.10 G80
1989 GMC Suburban V2500 TBI350 TH400 4in lift 35's 14b SF

Offline Irish_Alley

  • Tim
  • Senior Member
  • ****
  • Posts: 13333
  • Family is not an important thing. It's everything.
Re: brake lites
« Reply #7 on: July 17, 2011, 12:01:59 am »
like 79 was saying there should be a junction where the bumper used to be where the wires are split up. sometimes p.o. will mess with them and sometime later it will just fail
If you can’t tell yourself the truth, who can you tell it to?~Irish_Alley

When you have eliminated the impossible, whatever remains, however improbable, must be the truth ~Sherlock Holmes

Offline jt1200r

  • Newbie
  • Posts: 29
Re: brake lites
« Reply #8 on: July 17, 2011, 07:42:33 am »
ill be checking that today
87 R10 4.3

Offline jt1200r

  • Newbie
  • Posts: 29
Re: brake lites
« Reply #9 on: July 17, 2011, 10:07:19 am »
got them working. the little tits on one bulb werent contacting and the connecter on the other side went bad. crazy that 2 different things go bad at the same time. thanks for all the suggestions
87 R10 4.3

Offline Irish_Alley

  • Tim
  • Senior Member
  • ****
  • Posts: 13333
  • Family is not an important thing. It's everything.
Re: brake lites
« Reply #10 on: July 17, 2011, 10:46:44 am »
The turn signal and brake lights are the same filament
If you can’t tell yourself the truth, who can you tell it to?~Irish_Alley

When you have eliminated the impossible, whatever remains, however improbable, must be the truth ~Sherlock Holmes