« previous next »
Pages: [1]   Go Down

Author Topic: Detonation worries  (Read 4990 times)

Offline BULLDOG

  • Newbie
  • Posts: 49
Detonation worries
« on: September 04, 2011, 02:53:05 pm »
Where doing a head and cam swap on a 350 for the 83 K20.
Where going to use some ZZ4 heads with 58 cc chambers the piston to deck clearance is .024 the pistons have a 12 cc dish and where esing a .028 head gasket and the Voodoo 60101 cam
http://www.summitracing.com/parts/LUN-60101
Do you all think I will get into detonation with this combo?


Logged
Black 1983 K20 and sm 465

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19177
Re: Detonation worries
« Reply #1 on: September 04, 2011, 04:24:37 pm »
You'll have to run the highest octane rating for your fuel... Run a cooler t-stat and play with the timing.
Logged
,                           ___ 
                         /  _ _ _\_
              ⌠¯¯¯¯¯'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10

Offline reload

  • Registered Users
  • *
  • Posts: 117
    • K & K Innovations
Re: Detonation worries
« Reply #2 on: September 05, 2011, 12:44:43 am »
Also run a colder spark plug. 
Logged

Offline BULLDOG

  • Newbie
  • Posts: 49
Re: Detonation worries
« Reply #3 on: September 05, 2011, 07:26:34 am »
You guys recommend me a cam that will work good with my combo
Logged
Black 1983 K20 and sm 465

Offline The dream

  • Registered Users
  • *
  • Posts: 147
Re: Detonation worries
« Reply #4 on: September 05, 2011, 05:07:31 pm »
go to compcams.com and they have a sheet you to fill out, give the most info you have on the truck, weight, engine, RPM's (your goal) gear ratio, cc, your tire size, use of the vehicle, compresion, etc.. and they will get back to you with a part #
Logged
Never give up.

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19177
Re: Detonation worries
« Reply #5 on: September 05, 2011, 05:27:53 pm »
Quote from: BULLDOG on September 05, 2011, 07:26:34 am
You guys recommend me a cam that will work good with my combo


Ho about we build it and put it in your truck too. Would you like us to break in the cam as well?  ;D
Logged
,                           ___ 
                         /  _ _ _\_
              ⌠¯¯¯¯¯'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10

Offline BULLDOG

  • Newbie
  • Posts: 49
Re: Detonation worries
« Reply #6 on: September 05, 2011, 06:03:33 pm »
that would be nice while you all are dropping in the engine and breaking it in the truck needs wheel bearings and the transfer case is leaking
Logged
Black 1983 K20 and sm 465

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19177
Re: Detonation worries
« Reply #7 on: September 05, 2011, 08:17:57 pm »
Done

Please pay at the next window.
Logged
,                           ___ 
                         /  _ _ _\_
              ⌠¯¯¯¯¯'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10

Offline Irish_Alley

  • Tim
  • Senior Member
  • ****
  • Posts: 13333
  • Family is not an important thing. It's everything.
Re: Detonation worries
« Reply #8 on: September 06, 2011, 03:31:15 am »
Quote from: BULLDOG on September 05, 2011, 06:03:33 pm
that would be nice while you all are dropping in the engine and breaking it in the truck needs wheel bearings and the transfer case is leaking


the leak aint nothing mud has a had time sticking to oil. run her till the wheels fall off  ;D
Logged
If you can’t tell yourself the truth, who can you tell it to?~Irish_Alley

When you have eliminated the impossible, whatever remains, however improbable, must be the truth ~Sherlock Holmes
Pages: [1]   Go Up
« previous next »