« previous next »
Pages: [1]   Go Down

Author Topic: SM465 Bell house  (Read 5024 times)

Offline csdineley

  • Newbie
  • Posts: 87
SM465 Bell house
« on: May 07, 2013, 08:14:12 pm »
Hello

Today My wife and I pulled the engine and trans out of my parts truck. The downside is we broke the slave cylinder ear off the bell house, whoops! So is it possible to have it welded back on? Or should I hit up the junk yards?
Logged
1987 V20 Custom Deluxe, Vortec Headed 350, SM465,Np205 14Bff 4.10

Offline gildardo01

  • Frequent Member
  • **
  • Posts: 265
  • Newbie
Re: SM465 Bell house
« Reply #1 on: May 07, 2013, 09:52:50 pm »
you could weld it or find a used bell housing just depends whats cheaper in your area... either will work.. personally i think a used one might be cheaper and more hassle free....
Logged

Offline Blazin

  • Blazin new trails!
  • Senior Member
  • ****
  • Posts: 6130
Re: SM465 Bell house
« Reply #2 on: May 08, 2013, 01:12:40 am »
Cast aluminum doesn't weld very good, and is not very strong if you can get it to weld. I would find a used one.
Logged
Some people are like Slinkies. Not really good for anything, but they still bring a smile to your face when you push them down a flight of stairs

Offline Irish_Alley

  • Tim
  • Senior Member
  • ****
  • Posts: 13333
  • Family is not an important thing. It's everything.
Re: SM465 Bell house
« Reply #3 on: May 09, 2013, 04:15:47 pm »
Quote from: Blazin on May 08, 2013, 01:12:40 am
Cast aluminum doesn't weld very good, and is not very strong if you can get it to weld. I would find a used one.
Logged
If you can’t tell yourself the truth, who can you tell it to?~Irish_Alley

When you have eliminated the impossible, whatever remains, however improbable, must be the truth ~Sherlock Holmes

Offline csdineley

  • Newbie
  • Posts: 87
Re: SM465 Bell house
« Reply #4 on: May 14, 2013, 10:10:53 pm »
Think I've found at least one hydro bell house, maybe two at a local junkyard. Question is what would be the best / easiest way to remove them from the trucks? I don't think I'm supposed to bring any jacks or climb under the vehicles. Any suggestions? 
Logged
1987 V20 Custom Deluxe, Vortec Headed 350, SM465,Np205 14Bff 4.10

Offline Irish_Alley

  • Tim
  • Senior Member
  • ****
  • Posts: 13333
  • Family is not an important thing. It's everything.
Re: SM465 Bell house
« Reply #5 on: May 16, 2013, 06:58:22 am »
depends on the yard but some will pull it for you or they will at least come over and lift the truck up for you. i had one come over to the truck i wanted the axles from, they lifted they truck and cut them off with torches for nothing extra
Logged
If you can’t tell yourself the truth, who can you tell it to?~Irish_Alley

When you have eliminated the impossible, whatever remains, however improbable, must be the truth ~Sherlock Holmes

Offline csdineley

  • Newbie
  • Posts: 87
Re: SM465 Bell house
« Reply #6 on: May 16, 2013, 02:41:33 pm »
Well the guy I spoke with at the yard was wrong neither of the two were Hydro bellhouses.
Logged
1987 V20 Custom Deluxe, Vortec Headed 350, SM465,Np205 14Bff 4.10
Pages: [1]   Go Up
« previous next »