Author Topic: Door Panels  (Read 4841 times)

Offline Old GMC

  • Newbie
  • Posts: 4
  • Newbie
Door Panels
« on: June 21, 2013, 12:23:13 pm »
Will the door panels interchange between 73-87?  I know the doors are different part #'s but will the panels fit?

Offline zieg85

  • Global Moderator
  • Senior Member
  • ****
  • Posts: 7595
    • 73-87 GM squarebody extended cab and conversions up to 91 R/V series
Re: Door Panels
« Reply #1 on: June 21, 2013, 02:54:50 pm »
73-76, 77-80, then 81-87.  The 77-80 will go on the 81-87 and back however the trim won't line up and match.
Carl 
1985 C20 Scottsdale 7.4L 4 speed 3.21
1986 C10 under construction
https://www.facebook.com/groups/248658382003506/

Offline Old GMC

  • Newbie
  • Posts: 4
  • Newbie
Re: Door Panels
« Reply #2 on: June 21, 2013, 07:05:20 pm »
Thanks for the reply zieg85.  When you say the trim won't line up, just what are you referring too?  I am installing power windows in my 73 and will be installing new panels.  I want to use newer panels with no window crank holes.  I was hoping the 81-87 panels would fit my 73 without much modification.  Possible?  Is there really a big difference to the inside of the doors between years?   

Offline zieg85

  • Global Moderator
  • Senior Member
  • ****
  • Posts: 7595
    • 73-87 GM squarebody extended cab and conversions up to 91 R/V series
Re: Door Panels
« Reply #3 on: June 21, 2013, 08:03:52 pm »
Carl 
1985 C20 Scottsdale 7.4L 4 speed 3.21
1986 C10 under construction
https://www.facebook.com/groups/248658382003506/

Offline Captkaos

  • OWNER and Administrator
  • Administrator
  • Senior Member
  • *****
  • Posts: 18454
    • http://www.73-87chevytrucks.com
Re: Door Panels
« Reply #4 on: June 22, 2013, 12:18:24 am »
Yes the different is significant.

Offline Old GMC

  • Newbie
  • Posts: 4
  • Newbie
Re: Door Panels
« Reply #5 on: June 22, 2013, 02:47:44 pm »
Thanks all for the info, will be installing aftermarket power window regulators so I think I'll try the 81-87 panels, how hard can it be right!  Thanks again for the info. :)