« previous next »
Pages: [1]   Go Down

Author Topic: 454 vortec heads  (Read 5070 times)

Offline jwag30

  • Newbie
  • Posts: 30
454 vortec heads
« on: January 25, 2010, 11:46:22 pm »
I have found a low mileage "35000" 454 out of a RV for a good price. $600

And also a set of vortec heads that are in need of a rebuild. $350obo

My question is would the vortec heads be worth the extra money plus the cost of a rebuild.

Or rebuild the heads that are on the motor. This will be my first bbc.

Thx Josh
Logged
Speed is only a matter of money. How fast do you want to go!

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19213
Re: 454 vortec heads
« Reply #1 on: January 26, 2010, 06:28:43 am »
What's the casting # on the heads that are on it? I wouldn't spend $350 on those heads
Logged
,                           ___ 
                         /  _ _ _\_
              ⌠ŻŻŻŻŻ'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10

Offline 07montecarlo

  • Newbie
  • Posts: 44
Re: 454 vortec heads
« Reply #2 on: January 26, 2010, 06:38:43 am »
big block vortecs arent like sbc vortecs, they quite breathing at 5000 then drop on there face..but pull real hard and great for a 5k rpm motor or less on the street
Logged

Offline joesgarage71

  • Wrench
  • Senior Member
  • ****
  • Posts: 1156
Re: 454 vortec heads
« Reply #3 on: January 31, 2010, 01:26:10 pm »
 good price on the 454, it has peanut port heads on it. Vortecs flow better than the peanut heads and you can make around 500hp with them. $350. for a set that need to be rebuilt? I don't think so! maybe 350 if they were ready to bolt on.
Logged
78' K-20 355/SM465/twin stick 205 6" on 36's
14 bolt FF/big bearing Dana 44 4.56 gears
92' GMC C-1500 454/4L80E/14 bolt
Pages: [1]   Go Up
« previous next »