« previous next »
Pages: [1]   Go Down

Author Topic: Keep going through distributor gears.  (Read 2766 times)

Offline 1979C20

  • Senior Member
  • ****
  • Posts: 1659
  • Kyle Taulton.
Keep going through distributor gears.
« on: November 02, 2014, 04:36:48 am »
79 c20 with a 350. 3970010 block, comp cams 262l 440d and a factory distributor. Im on my 3rd distributor gear in about 5k miles on the build. The engine keeps chewing the teeth off it. Its wearing right in the middle, but just tearing it up. I have no clue what the problem could be. Anybody heard of this?
Logged
1979 SCLB C20 Q-jet 350 SM465 14b F.F. 4.10 G80
1989 GMC Suburban V2500 TBI350 TH400 4in lift 35's 14b SF

Offline zieg85

  • Global Moderator
  • Senior Member
  • ****
  • Posts: 7595
    • 73-87 GM squarebody extended cab and conversions up to 91 R/V series
Re: Keep going through distributor gears.
« Reply #1 on: November 02, 2014, 05:29:13 am »
I would think the cam is the issue
Logged
Carl 
1985 C20 Scottsdale 7.4L 4 speed 3.21
1986 C10 under construction
https://www.facebook.com/groups/248658382003506/

Offline Stewart G Griffin

  • Senior Member
  • ****
  • Posts: 3324
Re: Keep going through distributor gears.
« Reply #2 on: November 02, 2014, 07:51:32 am »
We need a sticky/or tech section thread on distributor gear compatibility.
Logged

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19180
Re: Keep going through distributor gears.
« Reply #3 on: November 02, 2014, 10:12:30 am »
Check the specific cam you used for manufacturer recommendations. Are you sure you are properly installing and securing the distributor?
Logged
,                           ___ 
                         /  _ _ _\_
              ⌠ŻŻŻŻŻ'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10

Offline 1979C20

  • Senior Member
  • ****
  • Posts: 1659
  • Kyle Taulton.
Re: Keep going through distributor gears.
« Reply #4 on: November 02, 2014, 10:21:35 pm »
Comp cams 12-206-2 hydraulic flat tappet cam. Factory hei distributor. Im installing the distributor correctly, it has up and down free play so its not bottomed out on the oil pump, hold down is tight with the gasket in place.
Logged
1979 SCLB C20 Q-jet 350 SM465 14b F.F. 4.10 G80
1989 GMC Suburban V2500 TBI350 TH400 4in lift 35's 14b SF

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19180
Re: Keep going through distributor gears.
« Reply #5 on: November 03, 2014, 07:39:12 pm »
find out from them what distributor gear they recommend
Logged
,                           ___ 
                         /  _ _ _\_
              ⌠ŻŻŻŻŻ'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10

Offline 76maresca

  • Newbie
  • Posts: 4
  • Newbie
Re: Keep going through distributor gears.
« Reply #6 on: November 09, 2014, 07:53:53 pm »
Call comp cams
Logged
Pages: [1]   Go Up
« previous next »