« previous next »
Pages: [1]   Go Down

Author Topic: K10 motor mounts  (Read 2850 times)

Offline ajdmello

  • Newbie
  • Posts: 60
  • Newbie
K10 motor mounts
« on: June 05, 2016, 04:14:24 pm »
Ok guys i bought a frame to start my build with told it was from an 85 4x4 and it had motor mount on it.  also had plates on them to move the mount farther forward and was missing a crossmember and the other one was all bent up like they needed the room for a big block maybe not sure but i want to know if theses are right for a 350 and in the right place
Logged

Offline ajdmello

  • Newbie
  • Posts: 60
  • Newbie
Re: K10 motor mounts
« Reply #1 on: June 05, 2016, 04:39:38 pm »
here is the pic...finally
Logged

Offline Engineer

  • Senior Member
  • ****
  • Posts: 1402
Re: K10 motor mounts
« Reply #2 on: June 07, 2016, 10:18:21 pm »
Looks ok to me. Mounts seem to line up with the bump stop bracket, or at least where it is supposed to line up.

Now the crossmember that is a different story. It is supposed to be bolted to the motor mount brackets.
Logged
2002 Chevy 2500HD 4x4 8.1/ZF6sp RC/LB
2001 Chevy 2500HD 4x4 6.0/4L85E EC/SB
1997 Chevy Blazer 4x4
1994 Chevy K-2500 4x4 C6P 5.7/4L80E
1979 Chevy K-30 4x4 4sp 4.10
1977 Chevy K-30 4x4 4sp 4.10 454

Dad of an Eagle Scout, and a Life Scout

Offline ajdmello

  • Newbie
  • Posts: 60
  • Newbie
Re: K10 motor mounts
« Reply #3 on: June 08, 2016, 08:42:11 am »
Quote from: Engineer on June 07, 2016, 10:18:21 pm
Looks ok to me. Mounts seem to line up with the bump stop bracket, or at least where it is supposed to line up.

Now the crossmember that is a different story. It is supposed to be bolted to the motor mount brackets.

Ok thought they seemed to go there but the ones on my 6cyl truck had a few more holes so i wasnt 100 percent sure.

That crossmember came out of the 6cyl also im thinking i have to take off the bolts and then the vertical parts come off  and i can bolt it right to the mounts.
Logged
Pages: [1]   Go Up
« previous next »