gas gauge wiring help

[Leadfoot]

I need some wiring help.. my `82 truck came with the dual tanks..I have done away with both tanks and the switching valve and installed a suburban tank in the back between the frame rails.. the new tank only has the ground and the pink wire from the sending unit,anybody got an idea where I need to hook this in to the original wiring to get a functional gas gauge??

Thanks,
Tim

Edited by: Leadfoot at: 5/2/06 1:02 pm

[roundedline]

The switching valve should have had a sending wire to it and each tank should have had a ground running to the frame rail.  If you know where the wire is for the sending unit, then you can just hook it back up.  As for the ground, just ground it to the frame.  I was thinking the sending wire was brown...

Chris Lucas
www.73-87chevytrucks.com
www.captkaoscustoms.com
Project Su
Jimmy 2WD Project

[123 pugsy]

Don't know about dual tank trucks,but mine comes down thru with the wire for the starter motor.

[Leadfoot]

Thanks for the help..I'll see what I can find..

Tim