« previous next »
Pages: [1]   Go Down

Author Topic: Marker Lights Not Working.  (Read 3457 times)

Offline Bobbo

  • Newbie
  • Posts: 3
Marker Lights Not Working.
« on: July 22, 2006, 01:50:00 pm »
Ok first off I have an 87 GMC 1/2 ton, I put in the euro headlights (4) and they all work great.

Now my marker lights were working, then they became dim, now they dont.

I checked the brown wire running from the side marker and it had like 1 volt to it, I traced it to the headlight switch, still only 1 volt, I took the switch out and checked it on the battery with a hot wire, and the switch itself is good.

I did some testing on the incoming wires for the switch and I have a constant 12 V on the large red, but on this orange wire I am getting about 1 volt???  I dont know much about wiring so i am pretty lost.

Any help is appreciated.  Bob

Logged

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19179
?
« Reply #1 on: July 23, 2006, 12:19:00 pm »
your marker lights aren't working as in your license plate lights? Or are you talking about the parking lights?

Logged
,                           ___ 
                         /  _ _ _\_
              ⌠ŻŻŻŻŻ'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10

Offline Bobbo

  • Newbie
  • Posts: 3
Re: ?
« Reply #2 on: July 23, 2006, 07:12:00 pm »
It was all my marker lights/signal lights/ tail lights.  After I pluged everything back in it all worked again, so my problem is likely with corrosion on the main plug in on the firewall.

Thanks, Bob

Logged
Pages: [1]   Go Up
« previous next »